N1950C accident

NTSB ERA25LA295 · 2025-08-08 · Memphis, TN · near MEM

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that during the landing roll at about 15 mph the airplane veered to the right. He applied left rudder and left brake to correct for the veer, but the left main landing gear collapsed. The airplane sustained substantial damage to the lower fuselage and left wing. Examination of the left main landing gear by the NTSB Materials Laboratory revealed that it fractured due to the loss of its protective paint coating and alteration of the local surface finish, likely caused by impermissible surface grinding, which led to intergranular attack and subsequent fatigue cracking.

Probable cause

Failure of the left main landing gear due to the loss of the protective paint coating and a change in the local surface finish from impermissible grinding, which resulted in fatigue cracking. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
11000
Visibility (sm)
8
Wind direction
90
Wind speed (kt)
9
Temperature (F)
77
Nearest airport
MEMPHIS INTL
Distance from field
0.5
Airport elevation
340

Aircraft

RegistrationMakeModelDamageFAR part
N1950C — — SUBS 091

Sequence of events

#OccurrencePhase
3 Landing-landing roll Landing gear collapse defining Cruise
4 Landing-landing roll Attempted remediation/recovery Cruise
5 Landing-landing roll Dragged wing/rotor/float/other Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Failure cause
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Fatigue/wear/corrosion cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Attain/maintain not possible factor
Personnel issues-Task performance-Maintenance-Unauthorized maint/repair-Unknown/Not determined cause