N476SM accident

NTSB CEN25LA322 · 2025-08-14 · Joliet, IL

Docket — crew, injuries and powerplant

Summary

The pilot reported that he fueled the airplane and departed for a planned 3-hour banner tow flight. About two hours into the flight, he heard a “loud bang” from the engine, which resulted in strong vibrations and a gradual loss of engine power. Shortly after, the engine lost total power, and the pilot executed a forced landing to a field. During the landing roll, the airplane ground looped and impacted a fence, which resulted in substantial damage to the left elevator. Postaccident examination of the engine revealed that the No. 2 cylinder exhaust valve failed. Most of the valve stem remained inside the valve guide while the valve head was destroyed inside the cylinder. There were no other engine mechanical malfunctions or anomalies that would have precluded normal operation.

Full narrative

On August 14, 2025, at 1714 central daylight time, a Piper PA-18-150 airplane, N476SM, was substantially damaged when it was involved in an accident near Joliet, Illinois. The pilot was not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 banner tow flight.

The pilot reported that he fueled the airplane and departed for a planned 3-hour banner tow flight in and around the Joliet area. About two hours into the flight, he heard a “loud bang” from the engine, which resulted in strong vibrations and a gradual loss of engine power. Shortly after, the engine lost total power, and the pilot executed a forced landing to a field. During the landing roll, the airplane ground looped and impacted a fence, which resulted in substantial damage to the left elevator.

The responding FAA inspector reported that there was engine oil on the bottom of the fuselage from the engine cowling to the empennage. There was also oil leaking from the engine exhaust pipe area. Postaccident examination of the engine revealed that the No. 2 cylinder exhaust valve failed. Most of the valve stem remained inside the valve guide, while the valve head was destroyed inside the cylinder. There were no other engine mechanical malfunctions or anomalies that would have precluded normal operation.

About 9 months and 440 hours before the accident, the No. 2 cylinder was replaced with a reworked cylinder. The engine had been inspected eight times since the cylinder was replaced with no discrepancies noted with the cylinder. The last seven inspections were in conjunction with an oil change, which were completed about every 50 to 75 hours.

Probable cause

The failure of the No. 2 cylinder exhaust valve, which resulted in a total loss of engine power. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
84
Distance from field
1.2
Airport elevation
582

Aircraft

RegistrationMakeModelDamageFAR part
N476SM — — SUBS 091

Sequence of events

#OccurrencePhase
2 Maneuvering Loss of engine power (total) defining Climb
4 Landing-landing roll Collision during takeoff/land Cruise

Findings

Finding
Aircraft-Aircraft power plant-Engine (reciprocating)-Recip eng cyl section-Failure cause