N14GC accident

NTSB WPR25LA258 · 2025-08-19 · Vacaville, CA · near VCB

Docket — crew, injuries and powerplant

Factual narrative

The pilot of the tailwheel equipped airplane reported that he performed a wheel landing, and that during the landing roll, as the tailwheel contacted the ground, he felt the left wing start to get low. The pilot attempted to correct with aileron input; however, the lower left wing struck the runway. The pilot applied full power to abort the landing; however, airplane veered to the right and exited the right side of the runway. The left main landing gear struck rough terrain and the airplane subsequently nosed over and came to rest inverted, which resulted in substantial damage to the left lower wing and rudder. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation. At the time of the accident, the pilot was landing the airplane on runway 02 with wind from 180° at 7 knots.

Probable cause

The pilot's failure to maintain directional control during the landing roll with a quartering tailwind. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
180
Wind speed (kt)
7
Temperature (F)
88
Nearest airport
NUT TREE
Distance from field
0.0
Airport elevation
116

Aircraft

RegistrationMakeModelDamageFAR part
N14GC — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Loss of control on ground defining Cruise
2 Landing-landing roll Other weather encounter Cruise
3 Landing-landing roll Runway excursion Cruise
4 Landing-landing roll Attempted remediation/recovery Cruise
5 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause
Environmental issues-Conditions/weather/phenomena-Wind-Crosswind-Effect on operation cause