N591KY accident

NTSB ERA25LA321 · 2025-08-22 · Walbridge, OH · near TDZ

Docket — crew, injuries and powerplant

Factual narrative

The pilot of the hot air balloon planned for a local sightseeing flight that departed and returned to the same airport. During the flight, the pilot realized that the balloon would not be able to return to the airport as planned, so he selected a field for an off-airport landing. During the final portion of the landing approach, one of the passengers alerted the pilot to the presence of a previously unseen powerline. Due to the balloon’s close proximity to the ground and the powerline, the pilot elected to vent the envelope and allow it to drape over the power line rather than risk the parts of the balloon between the envelope and the basket contacting the powerline. After touchdown, the envelope and the upper portion of one (steel) riser cable contacted two wires. The pilot heard a pop and saw an arc, which ultimately resulted in substantial damage to the riser cable, a quick link connector, and the envelope. The pilot and passengers were not injured. The pilot reported that there were no preimpact mechanical malfunctions or failures of the balloon that would have precluded normal operation.

Probable cause

The balloon pilot’s failure to see and avoid powerlines during an off-field airport landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
310
Wind speed (kt)
3
Temperature (F)
79
Nearest airport
TOLEDO EXEC
Distance from field
0.80000001
Airport elevation
622

Aircraft

RegistrationMakeModelDamageFAR part
N591KY — — SUBS 091

Sequence of events

#OccurrencePhase
5 Approach Miscellaneous/other defining Cruise

Findings

Finding
Personnel issues-Action/decision-Info processing/decision-Identification/recognition-Pilot cause
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Pilot cause