N26RJ accident

NTSB CEN25LA361 · 2025-09-02 · Caro, MI · near CFS

Docket — crew, injuries and powerplant

Factual narrative

After departure, the pilot noticed the landing gear position indicator light did not show that the landing gear was retracted and the circuit breaker was tripped. He cycled the circuit breaker a few times and it kept tripping. The pilot then diverted to an airport where he normally had maintenance performed on his airplane. While landing, the airplane veered sharply to the right and went through a ditch which resulted in substantial damage to the empennage. After the accident, it was discovered the pilot had forgotten to remove the tow bar he used to pull the airplane out of the hangar. The pilot reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot’s failure to remove the tow bar before flight. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
5500
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
2
Temperature (F)
75
Nearest airport
TUSCOLA AREA
Distance from field
0.2
Airport elevation
704

Aircraft

RegistrationMakeModelDamageFAR part
N26RJ — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Miscellaneous/other defining Cruise

Findings

Finding
Personnel issues-Task performance-Inspection-Preflight inspection-Pilot cause
Aircraft-Aircraft systems-Landing gear system-Nose/tail landing gear-Inadequate inspection factor