N8313N accident

NTSB ERA25LA343 · 2025-08-20 · St. Petersburg, FL · near SPG

Docket — crew, injuries and powerplant

Factual narrative

The pilot of the multi-engine airplane departed from the airplane’s home airport on a cross-country flight. The pilot stated that the takeoff and initial climb were normal; however, shortly after departure, he noted that the alternators went offline and the battery began to discharge. The pilot attempted to restore the alternators by resetting the switches and field circuit breakers. Unable to regain alternator functionality, the pilot elected to abort the flight and return to the departure airport. The pilot reported that he attempted to extend the landing gear and heard the gear motor operate. During the return to the airport, the pilot reported additional electrical issues, such as the airplane’s primary flight display turning off and rebooting. While on final approach to the airport, the pilot reported that the landing gear down and locked light was not illuminated; however, the mechanical tab on the floorboard indicated the landing gear was down. Upon touchdown, the landing gear collapsed, and the airplane skidded down the runway to a stop resulting in substantial damage to the fuselage. Surveillance images of the airplane as it was on final approach revealed that the nose landing gear was not extended and the main landing gear appeared to be at least partially extended. Had the pilot coordinated with the control tower to observe the landing gear position, it is possible that they would have been able to alert the pilot that all of the landing gear were not fully extended. Postaccident examination of the airplane revealed that the landing gear motor circuit breaker had tripped and that the landing gear was capable of being extended and locked in place using the emergency extension system. The examination also revealed that both alternator belts were in place on the alternators, and the battery had sufficient voltage to operate the airplane’s electrical system. Since the landing gear was able to be extended using the emergency extension system, it is likely that the landing gear circuit breaker had tripped due to an electrical wiring issue or an issue with the landing gear motor.

Probable cause

The pilot’s failure to extend the landing gear prior to landing. Contributing to the accident was a malfunction of the landing gear’s electrical retraction/extension system, which tripped the circuit breaker. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
30
Wind speed (kt)
5
Temperature (F)
88
Nearest airport
ALBERT WHITTED
Distance from field
0.0
Airport elevation
6

Aircraft

RegistrationMakeModelDamageFAR part
N8313N — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Landing gear collapse Cruise
2 Landing Landing gear not configured defining Cruise
3 Landing Electrical system malf/failure Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Gear extension and retract sys-Malfunction cause
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Pilot cause
Aircraft-Aircraft systems-Landing gear system-Gear extension and retract sys-Not used/operated cause