N2040X accident

NTSB CEN26LA033 · 2025-10-30 · Lakeview, AR · near 3M0

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that during the landing, he noticed that his approach path was taking the airplane towards an unexpected ditch short of the runway threshold. The pilot attempted to correct by increasing engine power; however, the airplane impacted on the berm short of the runway which resulted in substantial damage to the left wing and fuselage. The pilot mistakenly set the flaps to the improper setting which had altered the airplane’s approach path and degraded aircraft performance. The pilot reported there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation. In addition, the pilot reported that he had not been sleeping well for the past several weeks and was likely fatigued and exhausted.

Probable cause

The pilot’s failure to maintain a proper approach path during landing which resulted in a collision with terrain short of the runway. Contributing to the accident was the improper flap position during landing, and the pilot being fatigued. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
57
Nearest airport
Gastons
Distance from field
0.0
Airport elevation
479

Aircraft

RegistrationMakeModelDamageFAR part
N2040X — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Collision with terr/obj (non-CFIT) defining Cruise
2 Landing Miscellaneous/other Cruise

Findings

Finding
Aircraft-Aircraft systems-Flight control system-TE flap control system-Incorrect use/operation cause
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Pilot cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Descent/approach/glide path-Not attained/maintained cause
Personnel issues-Physical-Alertness/Fatigue-Lack of sleep-Pilot cause