N5062V Varga Aircraft Corp. 2150A accident

NTSB ERA26LA080 · 2025-12-28 · Frostproof, FL · near 52FL

Docket — crew, injuries and powerplant

Factual narrative

The pilot was attempting to take off from a private turf runway, utilizing a soft-field takeoff technique. The pilot reported that upon rotation, the left wing started to drop, and the airplane drifted left of the runway center line. He applied additional right rudder and aileron inputs but was unable to correct the left drift. Having concerns about clearing an obstacle at the end of the runway, the pilot aborted the takeoff due to the airplane not climbing as expected. The left main landing gear impacted the ground, and the left wing impacted a fence off the left side of the runway. The airplane came to rest upright after pivoting 180º, resulting in substantial damage to the left wing and fuselage. The pilot stated there were no preimpact mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot’s failure to maintain control of the airplane during takeoff, resulting in a runway excursion and collision with terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
32
Nearest airport
Lake Clinch Airpark
Distance from field
0.0
Airport elevation
110

Aircraft

RegistrationMakeModelDamageFAR part
N5062V VARGA AIRCRAFT CORP. 2150A SUBS 091

Sequence of events

#OccurrencePhase
3 Takeoff Loss of control in flight defining Takeoff
4 Takeoff-rejected takeoff Loss of control on ground Takeoff
5 Takeoff-rejected takeoff Runway excursion Takeoff
6 Takeoff-rejected takeoff Collision with terr/obj (non-CFIT) Takeoff

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause