N29UA Cirrus Design Corp SR22 accident

NTSB ERA26LA088 · 2026-01-08 · Philippi, WV · near 79D

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that while approaching the 3,275-ft-long runway, he configured the airplane with full flaps. He thought that the airplane touched down approximately halfway down the runway, after which he applied braking; however, he was unable to stop the airplane on the paved surface. The airplane departed the runway, traveled through grass, down an embankment, and through an airport perimeter fence before coming to rest upright. The airplane sustained substantial damage to the right wing. A postaccident examination of the accident site by an FAA inspector revealed that the airplane touched down about 557 ft before the departure end of the runway. The pilot reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot’s failure to obtain the proper touchdown point, which resulted in a runway overrun. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
46
Nearest airport
PHILIPPI/BARBOUR COUNTY RGNL
Distance from field
0.5
Airport elevation
1755

Aircraft

RegistrationMakeModelDamageFAR part
N29UA CIRRUS DESIGN CORP SR22 SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Landing area overshoot defining Cruise
2 Landing-landing roll Runway excursion Cruise
3 Landing-landing roll Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Descent/approach/glide path-Not attained/maintained cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Surface speed/braking-Capability exceeded factor