N90MN Kubicek Factory S R O BB26M accident

NTSB WPR26LA079 · 2026-01-10 · La Verkin, UT

Docket — crew, injuries and powerplant

Factual narrative

The pilot of the balloon reported that during the flight, the wind pattern changed, and the balloon had traveled toward a congested area. The pilot attempted to land in a clearing, however, decided to abort the landing with the application of the burners to initiate a climb. Subsequently, the pilot realized that the balloon would not clear a set of power lines ahead of their position and pulled out the top of the balloon to expedite a descent. The balloon impacted the power lines and support pole, which resulted in substantial damage to multiple basket suspension cables. The pilot reported that there were no preaccident mechanical malfunctions or failures with the balloon that would have precluded normal operation.

Probable cause

The pilot’s failure to maintain clearance from powerlines after an aborted landing attempt. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
150
Wind speed (kt)
6
Temperature (F)
36
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N90MN KUBICEK FACTORY S R O BB26M SUBS 091

Sequence of events

#OccurrencePhase
1 Approach Collision with terr/obj (non-CFIT) defining Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Altitude-Attain/maintain not possible cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause