N996NR accident

NTSB WPR26LA083 · 2026-01-19 · Parkman, WY

Docket — crew, injuries and powerplant

Factual narrative

Two helicopters were conducting low-altitude wildlife capture operations in mountainous terrain when they collided mid-air. Both helicopters were substantially damaged; the pilots and passenger were uninjured. The pilots and passengers briefed their operational plan prior to departing. The first helicopter (N74730) was assigned to a northern sector and would perform operations starting on the north edge of that sector, working south. The second helicopter (N996NR) was assigned a sector bordering the southern boundary of the north sector and would begin its operations at the southernmost portion of its assigned sector, working north. The pilots each planned to meet at a fuel truck located near the common border of the two sectors. The operational area was in remote terrain that included hills, canyons, and ridges. The mission required the helicopters to operate close to/at ground level and included periodic landings. Approximately one hour after operations began, both helicopters arrived in the same area near the sector boundary, where they continued to independently conduct the low-altitude operations. The pilot of the second helicopter had just dropped off his passenger to complete a wildlife capture and had become airborne again. Both pilots reported they were airborne and descending slightly, when the pilot of the first helicopter saw the other helicopter converging head-on. The pilot of the first helicopter quickly applied full up collective control to attempt to climb above the flight path of the converging helicopter, and as they passed the helicopters collided. The collision resulted in substantial damage to the tail section of the first helicopter. The pilots stated they believed the accident could have been avoided with better radio communication. Additionally, the pilots reported that the terrain’s effect on radio transmissions and the operational workload prevented continuous and unreliable communication between the helicopters; therefore, they relied on see-and-avoid techniques to ensure safe separation. The pilots of both helicopters reported no mechanical malfunctions or anomalies that would have precluded normal operations.

Probable cause

The pilots’ failure to maintain separation while conducting air work in a common operational area. Contributing to the accident was the pilots’ divided attention associated with the mission activity and unreliable radio communications. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
260
Temperature (F)
25
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N996NR — — SUBS 091
N74730 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Enroute-cruise Midair collision defining Climb
1 Enroute-cruise Midair collision defining Climb

Findings

Finding
Personnel issues-Task performance-Workload management-Task allocation-Pilot cause
Environmental issues-Task environment-Pressures/demands-Equipment/operational-Awareness of condition cause
Environmental issues-Physical environment-Object/animal/substance-Aircraft-Effect on equipment cause
Personnel issues-Psychological-Attention/monitoring-Monitoring other aircraft-Pilot cause
Aircraft-Aircraft systems-Communications system-(general)-Not specified cause
Personnel issues-Task performance-Workload management-Task allocation-Pilot cause
Environmental issues-Task environment-Pressures/demands-Equipment/operational-Awareness of condition cause
Aircraft-Aircraft systems-Communications system-(general)-Not specified cause
Environmental issues-Physical environment-Object/animal/substance-Aircraft-Effect on equipment cause
Personnel issues-Psychological-Attention/monitoring-Monitoring other aircraft-Pilot cause