N6067J accident

NTSB WPR26LA179 · 2026-05-10 · Superior, AZ · near E81

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that during the takeoff portion of a touch-and-go landing, he initiated the takeoff with the flaps remaining in the fully extended landing position instead of retracting the flaps to 20° as prescribed by the pilot’s operating handbook. The extended flaps increased aerodynamic drag and reduced the airplane's climb performance. As the airplane struggled to gain altitude, the pilot maneuvered to avoid rising terrain while attempting to correct the flap configuration. During an off-field landing, the airplane impacted a sign, which resulted in substantial damage to the right wing and fuselage. The pilot reported that there were no mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot's failure to retract the flaps during takeoff following a touch-and-go landing, which resulted in degraded climb performance and an impact with an object during an off-field landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
300
Wind speed (kt)
7
Temperature (F)
100
Nearest airport
Superior Municipal
Distance from field
1.0
Airport elevation
2646

Aircraft

RegistrationMakeModelDamageFAR part
N6067J — — SUBS 091

Sequence of events

#OccurrencePhase
2 Takeoff Aerodynamic stall/spin defining Takeoff
4 Takeoff Ground collision Takeoff

Findings

Finding
Personnel issues-Psychological-Attention/monitoring-Monitoring equip/instruments-Pilot factor
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Airspeed-Not attained/maintained factor
Personnel issues-Action/decision-Action-Forgotten action/omission-Pilot factor
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Configuration-Incorrect use/operation cause
Environmental issues-Physical environment-Object/animal/substance-Sign/marker-Effect on equipment cause