N952SF Mcdonnell Douglas Helicopter 500 accident

NTSB WPR26LA188 · 2026-05-14 · Twin Falls, ID · near TWF

Docket — crew, injuries and powerplant

Factual narrative

The pilot stated he was maneuvering the helicopter around and near the airport property. While practicing hovering, he was evaluating the left lateral cyclic trim control. The helicopter encountered wind and rolled, coming to rest on its left side. During the accident sequence, the main rotor blades severed the tail boom from the airframe. The pilot stated there were no pre impact mechanical malfunctions or failures with the helicopter that would have precluded normal operation. At the time of the accident, the wind was from 320° at 11 knots, gusting to 17 knots.

Probable cause

The pilot’s failure to maintain control while hovering in gusty wind conditions, resulting in the helicopter rolling onto its side. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
320
Wind speed (kt)
11
Temperature (F)
66
Nearest airport
JOSLIN FLD/MAGIC VALLEY RGNL
Distance from field
0.0
Airport elevation
4153

Aircraft

RegistrationMakeModelDamageFAR part
N952SF MCDONNELL DOUGLAS HELICOPTER 500 SUBS 091

Sequence of events

#OccurrencePhase
2 Maneuvering-hover Other weather encounter Climb
3 Maneuvering-hover Loss of control in flight Climb
4 Maneuvering-hover Dynamic rollover defining Climb

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Lateral/bank control-Not attained/maintained cause
Environmental issues-Conditions/weather/phenomena-Wind-Gusts-Effect on operation cause