N15291 accident

NTSB CEN26LA211 · 2026-06-01 · Montevideo, MN · near MVE

Docket — crew, injuries and powerplant

Factual narrative

According to the pilot, while on final approach to the runway, the engine rpm began to run rough. The pilot applied carburetor heat, and the engine lost all power. The pilot attempted to restart the engine but was unsuccessful and prepared for a forced landing. The airplane touched down at the edge of a corn field and came to rest upright against a grass embankment. The airplane sustained substantial damage to the right wing and fuselage. Following the accident, the pilot stated that the loss of engine power was likely the result of carburetor icing. According to the airplane handbook, during approach and landing, carburetor heat should be off unless icing conditions exist. The weather conditions at the time of the accident were conducive to the formation of serious icing at glide engine power settings.

Probable cause

A total loss of engine power on approach due to carburetor icing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
140
Wind speed (kt)
12
Temperature (F)
64
Nearest airport
MONTEVIDEO-CHIPPEWA COUNTY
Distance from field
0.1
Airport elevation
1034

Aircraft

RegistrationMakeModelDamageFAR part
N15291 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Approach-VFR pattern final Loss of engine power (total) defining Cruise
2 Approach-VFR pattern final Off-field or emergency landing Cruise
3 Landing-flare/touchdown Landing gear collapse Cruise
4 Approach-VFR pattern final Fuel related Cruise

Findings

Finding
Environmental issues-Conditions/weather/phenomena-Temp/humidity/pressure-Conducive to carburetor icing-Effect on equipment cause
Personnel issues-Action/decision-Action-Lack of action-Pilot cause
Aircraft-Aircraft power plant-Engine fuel and control-Fuel control/carburetor-Not used/operated cause