N933A accident

NTSB CEN26LA262 · 2026-07-20 · Janesville, WI · near JVL

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that while he was on approach, a communication with the air traffic control (ATC) tower controller interrupted his completion of the before landing checklist. The pilot reported that he forgot to resume the checklist and lower the landing gear. About 20 ft above the runway, the ATC controller alerted the pilot that his landing gear was retracted. The pilot applied full engine power and attempted to lower the landing gear; however, the airplane touched down on the runway without the landing gear properly configured, which resulted in substantial damage to the left wing and left aileron. The pilot did not submit the National Transportation Safety Board Pilot/Operator Aircraft Accident/Incident Report Form 6120.1.

Probable cause

The pilot’s failure to extend the landing gear before landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
3500
Visibility (sm)
3
Wind direction
210
Wind speed (kt)
10
Temperature (F)
72
Nearest airport
SOUTHERN WISCONSIN RGNL
Distance from field
0.1
Airport elevation
807

Aircraft

RegistrationMakeModelDamageFAR part
N933A — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Landing gear not configured defining Cruise
2 Landing-flare/touchdown Abnormal runway contact Cruise

Findings

Finding
Personnel issues-Action/decision-Action-Forgotten action/omission-Pilot cause
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Pilot cause
Aircraft-Aircraft systems-Landing gear system-Gear extension and retract sys-Not used/operated cause