N717HL Beech 58P accident

NTSB SEA94LA074 · 1994-03-06 · BILLINGS, MT · near BIL

Docket — crew, injuries and powerplant

Summary

THE PILOT TOOK OFF AND ENTERED THE TRAFFIC PATTERN IN ORDER TO PRACTICE TOUCH-AND-GO LANDINGS. WHILE ON THE RUNWAY AFTER THE FIRST LANDING, THE PILOT INADVERTENTLY RAISED THE LANDING GEAR HANDLE, AND THE GEAR RETRACTED.

Full narrative

On March 6, 1994, approximately 0930 mountain standard time, the gear on a Beech 58P, N717HL, retracted during the landing roll at Billings-Logan Airport, Billings, Montana. The private pilot and his passenger were not injured, but the aircraft sustained substantial damage. The personal pleasure flight, which had just taken off from the same location for the purpose of practicing touch-and-go landings, was in visual meteorological conditions at the time of the accident. No flight plan had been filed, and there was no report of an ELT activation.

According to the FAA inspector who responded to the accident, the pilot reported that while performing touch-and-go landings on runway 28R, he accidently retracted the landing gear just after the airplane touched down.

Probable cause

THE PILOT'S INADVERTENT RETRACTION OF THE LANDING GEAR WHILE ON THE RUNWAY. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
50
Wind direction
260
Wind speed (kt)
15
Temperature (F)
50
Nearest airport
BILLINGS-LOGAN FIELD
Distance from field
0.0
Airport elevation
3450

Aircraft

RegistrationMakeModelDamageFAR part
N717HL BEECH 58P SUBS 091

Sequence of events

#OccurrencePhase
1 194 Cruise

Findings

Finding
22001 cause