N4764U Cessna 180H accident

NTSB LAX94LA248 · 1994-06-11 · WICKENBURG, AZ · near E25

Docket — crew, injuries and powerplant

Summary

THE PILOT ATTEMPTED A TAKEOFF WITH THE CONTROL LOCK STILL ENGAGED IN THE CONTROL COLUMN. PHOTOGRAPHS TAKEN BY THE LOCAL SHERIFF SHORTLY AFTER THE ACCIDENT DEPICTED THE CONTROL LOCK STILL INSTALLED.

Full narrative

On June 11, 1994, at 1000 hours mountain daylight time, the pilot of a Cessna 180H, N4764U, lost control and collided with terrain during takeoff from runway 05, at the Wickenburg Municipal Airport, Wickenburg, Arizona. The airplane was being operated as a personal flight by the pilot/owner. The airplane was substantially damaged. The certificated commercial pilot received serious injuries. Visual meteorological conditions prevailed with the winds from 240 degrees at 8 knots.

The Civil Air Patrol (CAP), reported to the Federal Aviation Administration (FAA), that the airplane's control lock was found engaged in the control column after the accident. Additionally, photographs provided by the local sheriff's office indicated that the control lock was attached to the control column.

Probable cause

the pilot's failure to remove the control lock prior to flight. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Serious
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
20
Wind direction
240
Wind speed (kt)
8
Temperature (F)
99
Nearest airport
WICKENBURG
Distance from field
0.0
Airport elevation
2386

Aircraft

RegistrationMakeModelDamageFAR part
N4764U CESSNA 180H SUBS 091

Sequence of events

#OccurrencePhase
1 260 Cruise
2 320 Cruise

Findings

Finding
10329 cause
24002 cause