CGPUR Pitts S1 accident

NTSB SEA94LA172 · 1994-07-05 · HEBER CITY, UT · near 36U

Docket — crew, injuries and powerplant

Summary

THE PILOT STATED THAT HE LANDED SOMEWHAT HARD ON THE MAIN LANDING GEAR, RECORDING 2 G'S ON HIS ACCELEROMETER. THE RIGHT MAIN LANDING GEAR WHEEL AND AXLE SEPARATED AND THE LANDING GEAR STRUT COLLAPSED. POST-CRASH INSPECTION REVEALED THAT THE FOUR ATTACHMENT BOLTS WERE EXCESSIVELY WORN AND WERE APPARENTLY IMPROPERLY TORQUED.

Full narrative

On July 5, 1994, approximately 1617 mountain daylight time, an experimental Pitts S-1 was substantially damaged during roll out when the right wheel/axle attachment hardware failed after landing at Heber City, Utah. The private pilot, who owned the aircraft, was uninjured. Visual meteorological conditions prevailed for the flight, which originated at Heber City at 1601. There was no fire and no report of an ELT actuating.

FAA inspectors noted that the nuts and bolts securing the axle to the aircraft were excessively worn, and indicated that the nuts had sheared their threads before separating. The pilot noted that four 1/4-20 bolts failed, causing wheel separation and subsequent gear failure, and indicated that the bolts had not been correctly torqued.

Probable cause

FAILURE OF MAIN LANDING GEAR AXLE HARDWARE. FACTORS INCLUDE COLLAPSE OF MAIN LANDING GEAR STRUT. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
30
Wind direction
210
Wind speed (kt)
18
Temperature (F)
79
Nearest airport
HEBER VALLEY
Distance from field
0.0
Airport elevation
5632

Aircraft

RegistrationMakeModelDamageFAR part
CGPUR PITTS S1 SUBS 091

Sequence of events

#OccurrencePhase
1 191 Cruise

Findings

Finding
10412 cause
10403 factor