N64292 Bell 47G3B1 accident

NTSB CHI94LA276 · 1994-08-11 · SARGEANT, MN

Docket — crew, injuries and powerplant

Summary

THE PILOT REPORTED HE HAD JUST COMPLETED AN AERIAL APPLICATION SPRAY RUN WITH THE HELICOPTER, AND WAS MANEUVERING TO START ANOTHER RUN. HE TURNED THE HELICOPTER TO MISS A GUY WIRE, AND IN THE PROCESS INADVERTENTLY ALLOWED THE MAIN ROTOR BLADES TO STRIKE A TRANSMISSION WIRE. HE WAS ABLE TO MAINTAIN PARTIAL CONTROL OF THE HELICOPTER, AND MADE A FORCED LANDING IN A NEARBY FIELD.

Full narrative

On August 11, 1994, about 1100 central daylight time, a Bell 47G3B1 helicopter, N64292, sustained substantial damage when it collided with power lines near Sargeant, Minnesota. The commercial pilot reported no injury. The aerial application flight operated in visual meteorological conditions without flight plan under 14 CFR Part 137.

The pilot reported he was making a swath run and maneuvered to miss a guy wire. During the turn to avoid the guy wire, the helicopter's main rotor collided with power lines. The pilot was able to maintain partial control of the helicopter, and made a forced landing in a nearby field.

Probable cause

the pilot's failure to maintain clearance from a transmission wire during an agricultural spray run. A factor in the accident is the transmission wire. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
1200
Visibility (sm)
10
Wind direction
110
Wind speed (kt)
2
Temperature (F)
63
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N64292 BELL 47G3B1 SUBS 137

Sequence of events

#OccurrencePhase
1 220 Cruise
2 180 Cruise
3 230 Cruise

Findings

Finding
20200 factor
24526 cause