N2064 Monocoupe Aircraft 110 SPECIAL accident

NTSB SEA95LA004 · 1994-10-08 · LANGLEY, WA

Docket — crew, injuries and powerplant

Summary

WHILE DESCENDING TO LAND AND BANKING TO THE RIGHT, THE ELEVATOR PARTIALLY SEPARATED FROM THE AIRPLANE AND IMPINGED UPON THE RUDDER. THE RUDDER WAS JAMMED TO THE FULL RIGHT POSITION AND AIRCRAFT CONTROL WAS RENDERED IMPOSSIBLE. THE PILOT ATTEMPTED TO LAND THE AIRPLANE AFTER ALL ATTEMPTS TO REGAIN CONTROL WERE UNSUCCESSFUL. DURING THE LANDING, THE AIRPLANE IMPACTED TREES AND WAS SUBSTANTIALLY DAMAGED. AN EXAMINATION OF THE WRECKAGE REVEALED THAT THE ELEVATOR HINGE ATTACH FITTING WELD HAD CORRODED FROM INSIDE AND FAILED.

Full narrative

On October 7, 1994, about 1800 hours Pacific daylight time, N2064, a Monocoupe 110 Special airplane, operated by Frederick E. Ludtke, Sr., Freeland, Washington, was substantially damaged during a forced landing into trees in Langley, Washington. The forced landing was precipitated by a flight control malfunction while descending. The commercial pilot, the sole occupant, was not injured. Visual meteorological conditions prevailed and no flight plan had been filed. The personal flight departed from Everett, Washington, and was conducted under 14 CFR 91.

According to the pilot, the airplane's rudder jammed into a full right deflection while the pilot was descending through 5,000 feet mean sea level and banking to the right. According to the pilot, "the result was a snap rolling entry into a right spin with the right rudder pedal in the full forward limit of travel." The pilot attempted to control the airplane by applying various levels of engine power and available flight controls. Full aircraft control could not be regained by the pilot. The airplane continued to descend in a bank and a "dramatic skid." The pilot stated that he decided to "slow the airplane down" and settle into trees. The airplane impacted trees and was substantially damaged.

Subsequent examination of the airplane revealed that the elevator hinge attach fitting had separated, allowing the elevator to partially detach from the airplane. An examination of the attach fitting revealed that the weld had failed. Corrosion was observed inside a void between the elevator hinge attach fitting base plate and the mating horizontal stabilizer spar.

Probable cause

CORROSION AND SUBSEQUENT FAILURE OF THE ELEVATOR HINGE ATTACH FITTING WELD. THIS ALLOWED THE ELEVATOR TO BEND AND IMPINGE UPON THE RUDDER, SUBSEQUENTLY JAMMING IT TO THE FULL RIGHT POSITION AND RENDERING THE AIRCRAFT IMPOSSIBLE TO CONTROL. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
30
Wind direction
320
Wind speed (kt)
7
Temperature (F)
61
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N2064 Monocoupe Aircraft 110 SPECIAL SUBS 091

Sequence of events

#OccurrencePhase
1 130 Cruise
2 180 Cruise
3 220 Cruise

Findings

Finding
10304 cause
10304 cause
10705 cause
20200
24566 cause