N5297E Park WIZARD accident

NTSB FTW95LA343 · 1995-08-14 · MINERAL WELLS, TX

Docket — crew, injuries and powerplant

Summary

WHILE IN CRUISE FLIGHT AT 2,000 FEET AGL, THE HOMEBUILT AIRPLANE'S ENGINE LOST POWER AND A FORCED LANDING WAS MADE TO A PLAYGROUND. DURING THE LANDING ROLL, THE LEFT WING STRUCK A BASEBALL BACKSTOP. EXAMINATION REVEALED A LOOSE ENGINE COOLANT LINE, THE LOSS OF ALL ANTIFREEZE, AND A SEIZED ENGINE CYLINDER. THE ENGINE COOLANT FITTING HAD A SMOOTH SURFACE WITH NO MECHANICAL MEANS (BEAD) TO RETAIN THE RUBBER COOLANT HOSE. THE OPERATOR REPORTED THE FITTING 'APPEARED AS A STANDARD PLUMBING FITTING.' ACCORDING TO THE ENGINE MANUFACTURER'S REPRESENTATIVE, ALL ENGINE AND RADIATOR CONNECTIONS DISTRIBUTED BY ROTAX CONTAIN A MECHANICAL MEANS TO RETAIN THE HOSE CONNECTIONS.

Full narrative

On August 14, 1995, at 1520 central daylight time, a homebuilt Park Wizard, N5297E, collided with a ground structure during a forced landing near Mineral Wells, Texas. The commercial pilot and pilot rated passenger were not injured and the airplane sustained substantial damage. The airplane, operated by the S-TEC Corporation under Title 14 CFR Part 91, departed the Mineral Wells Airport approximately 1515. The purpose of the flight was to flight check several autopilot components manufactured by S-TEC. Visual meteorological conditions prevailed and a flight plan was not filed.

During cruise flight at 2,000 feet MSL, the engine RPM decreased from 7,000 to 5,500 and, subsequently degrading to a complete loss of engine power. A forced landing was made to a playground. During the landing roll, the left wing sustained structural damage when it struck a "baseball backstop."

The airplane was examined by the operator and the Federal Aviation Administration (FAA) inspector. The water cooled engine was "stiff and felt notchy when rotated by hand." An engine coolant line was found loose from the cylinder head fitting and no engine coolant (antifreeze) remained in the radiator. Disassembly of the engine by the operator revealed that the "front cylinder had overheated and the piston had bound up in the cylinder, leaving aluminum scuff marks on the cylinder wall."

An examination of the engine coolant fitting revealed a smooth mating surface with "no mechanical means to retain the rubber coolant hose." Technicians for the operator reported the "fitting appeared as a standard plumbing fitting." According to the engine manufacturer's representative, "all engine and radiator connections distributed by Rotax contain a mechanical means to retain the connections." The FAA experimental airworthiness certificate issued on March 30, 1994, states the airplane was built by Adrian Bloomfield.

Probable cause

A SEIZED ENGINE FOLLOWING THE TOTAL LOSS OF ENGINE COOLANT FROM A LOOSE LINE DUE TO AN INADEQUATE MAINTENANCE INSTALLATION BY THE BUILDER. A FACTOR WAS THE LACK OF SUITABLE TERRAIN FOR THE FORCED LANDING. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
20
Wind direction
210
Wind speed (kt)
12
Temperature (F)
91
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N5297E PARK WIZARD SUBS 091

Sequence of events

#OccurrencePhase
1 351 Cruise
2 180 Cruise
3 310 Cruise

Findings

Finding
15707 cause
17010 cause
16902 cause
24111 cause
19200 factor
20200