N750GL Lampert REVOLUTION M500 accident

NTSB LAX96LA150 · 1996-03-31 · SAN CARLOS, CA · near SQL

Docket — crew, injuries and powerplant

Summary

According to FAA airman records, the pilot did not hold a rotorcraft category rating. FAA inspectors examined the pilot's logbook and reported that he received a solo endorsement in helicopters about 1 1/2 years ago. The pilot was returning to the airport following a local area flight. About 1 mile west of the airport, the pilot began to smell something burning and said he sensed something was wrong. Shortly thereafter, he heard a 'slap' sound as the helicopter transitioned through 50 feet and 50 knots about 1/4 mile from the runway. The pilot stated that he 'didn't do anything [with the controls] but keep it headed for an open area between the taxiway and the runway.' The pilot said he did not flare or touch the collective, and the helicopter hit hard in the open area and rolled on its left side. An FAA airworthiness inspector examined the helicopter and found the engine to transmission drive belt fragmented, with rubber transfer throughout the engine compartment. Rubber transfer on the pulleys showed a forward movement pattern of the belt off the pulley. The inspector reported that the pulley was designed without a flange or other means to keep the belt aligned.

Full narrative

On March 31, 1996, at 1347 hours Pacific standard time, a homebuilt experimental Lampert Revolution M500 helicopter, N750GL, collided with the ground and rolled over during landing at San Carlos, California. The aircraft was owned, built, and operated by the pilot. Visual meteorological conditions prevailed at the time and no flight plan was filed. The helicopter sustained substantial damage. The non-rotorcraft rated private pilot, the sole occupant, sustained minor injuries. The flight originated at Half Moon Bay, California, on the day of the accident at 1315 as a personal cross-country flight to San Carlos.

According to FAA airman records, the pilot does not hold a rotorcraft category rating. FAA inspectors examined the pilot's logbook and reported that he received a solo endorsement in helicopters about 1 1/2 years ago.

The pilot reported that he flew from San Carlos to Half Moon Bay earlier in the day and was returning to the San Carlos airport. About 1 mile west of the airport the pilot began to smell something burning and said he "sensed something was wrong." Shortly thereafter, he heard a "slap" sound as the helicopter transitioned through 50 feet and 50 knots about 1/4 mile from the runway. The pilot stated that he "didn't do anything [with the controls] but keep it headed for an open area between the taxiway and the runway." The pilot said he did not flare or touch the collective and the helicopter hit hard in the open area and rolled on its left side.

An FAA airworthiness inspector examined the helicopter and found the engine to transmission drive belt fragmented, with rubber transfer throughout the engine compartment. Rubber transfer on the pulleys showed a forward movement pattern of the belt off the pulley. The inspector reported that the pulley is designed without a flange or other means to keep the belt aligned.

Probable cause

the pilot's failure to recognize a drive train disengagement and initiate an autorotation. The inadequate engine-to-transmission drive belt/pulley design, and the pilot's limited training and experience in rotorcraft operations were factors in this accident. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
15000
Visibility (sm)
30
Wind direction
180
Wind speed (kt)
12
Temperature (F)
77
Nearest airport
SAN CARLOS
Distance from field
0.0
Airport elevation
2

Aircraft

RegistrationMakeModelDamageFAR part
N750GL LAMPERT REVOLUTION M500 SUBS 091

Sequence of events

#OccurrencePhase
1 130 Cruise
2 230 Cruise
3 380 Cruise

Findings

Finding
11018 factor
11018
11001
82100 factor
24628 cause
24520 cause
34332 factor