N2813C Cessna 170B accident

NTSB ANC96LA104 · 1996-07-18 · TYONEK, AK

Docket — crew, injuries and powerplant

Summary

The pilot was landing his tailwheel airplane on a narrow gravel road. During the landing roll, he lost directional control and the airplane swerved to the left and went off the roadway.

Full narrative

On July 18, 1996, about 1200 Alaska daylight time, a wheel equipped Cessna 170B airplane, N2813C, sustained substantial damage while landing at an off airport site located approximately 8 miles northwest of Tyonek, Alaska. The airline transport certificated pilot, and the sole passenger aboard, were not injured. The local, 14 CFR Part 91 flight departed Lake Hood Strip, Anchorage, Alaska, about 1130, and operated in visual meteorological conditions without a flight plan.

During a telephone conversation with the NTSB investigator-in-charge on July 23, 1996, the pilot stated he was attempting to land the airplane on a narrow, gravel surfaced road that was formerly used to provide access to oil well drilling sites. The pilot said he lost directional control during the landing roll, the airplane swerved to the left, went off the roadway, and subsequently damaged the right wing.

Probable cause

The pilot's failure to maintain directional control during the landing roll. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
UNK
Ceiling (ft)
0
Visibility (sm)
50
Wind direction
180
Wind speed (kt)
5
Temperature (F)
64
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N2813C Cessna 170B SUBS 091

Sequence of events

#OccurrencePhase
1 260 Cruise
2 320 Cruise

Findings

Finding
24539 cause