N58712 Boeing A75N1 accident

NTSB CHI96LA252 · 1996-07-21 · EAST TROY, WI · near 57C

Docket — crew, injuries and powerplant

Summary

The pilot reported that he flew a 'normal' approach to land on runway 8. During the landing roll, the airplane began to 'drift' to the right. The pilot 'applied the brakes gently' and the airplane nosed over. Examination of the airplane revealed the left rudder horn was fractured. No other evidence of mechanical malfunction was reported. Metallurgical examintion of the rudder horn 'showed no evidence of progressive cracking, such as fatigue. The fracture was typical of an overstress separation. There was thinning of the wall and corrosion pits on the inside surface of the tube... .' Measurements of some of the corrosion pits revealed that the thickness of the .035 inch wall tubing was corroded to a thickness of .008 inches in some areas. 'There was no indication that any of the corrosion pits had penetrated through the tube to the outside surface.'

Full narrative

On July 21, 1996, at 1011 central daylight time, a Boeing A75N1, N58712, sustained substantial damage when it nosed over during the landing roll at the East Troy Municipal Airport, East Troy, Wisconsin. The private pilot and one passenger reported no injuries. The personal, 14 CFR Part 91 flight originated in Staughton, Wisconsin, about 0940. Visual meteorological conditions prevailed and no flight plan was filed.

The pilot reported that he flew a "normal" approach to land on runway 08. During the landing roll, the airplane began to "drift" to the right. He "applied the brakes gently" and the airplane nosed over.

The airplane was inspected by a Federal Aviation Administration (FAA) inspector. He reported that the left rudder horn was fractured. No other evidence of mechanical malfunction was reported.

The rudder horn was examined by an engineering technician in the NTSB materials laboratory. In his factual report, the technician reported that the fracture "showed no evidence of progressive cracking, such as fatigue. The fracture was typical of an overstress separation. There was thinning of the wall and corrosion pits on the inside surface of the tube... ." Measurements of some of the corrosion pits revealed that the thickness of the .035 inch wall tubing was corroded to a thickness of .008 inches in some areas. "There was no indication that any of the corrosion pits had penetrated through the tube to the outside surface."

Probable cause

corrosion and fracture of the rudder control horn. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
140
Wind speed (kt)
9
Temperature (F)
19
Nearest airport
EAST TROY MUNICIPAL
Distance from field
0.0
Airport elevation
860

Aircraft

RegistrationMakeModelDamageFAR part
N58712 Boeing A75N1 SUBS 091

Sequence of events

#OccurrencePhase
1 130 Cruise
2 260 Cruise
3 300 Cruise

Findings

Finding
10705 cause
10705 cause