N7492F Hughes 269C accident

NTSB FTW96TA398 · 1996-09-24 · HOUSTON, TX · near HOU

Docket — crew, injuries and powerplant

Summary

The flight instructor was demonstrating an autorotation from 50 feet AGL to a grassy area. The helicopter touched down with skids level and the flight instructor increased the collective to keep the aircraft skids light on the ground and to maintain a straight ground track. The helicopter had traveled approximately 70 feet, and was moving at approximately 20 knots when the aircraft pitched forward and to the right. The flight instructor 'felt at least three severe impacts to the aircraft and then the aircraft was stopped.' Examination of the helicopter revealed that the left and right skid tubes were fractured, and the right skid was detached from its front and rear gear dampers. The tailboom and tail rotor were 'sheared off' by the 'main rotor blades.' Further examination of the skids revealed that the bottom of the right skid tube was 'worn beyond the manufacturers tolerances.' According to an FAA inspector, a 'certified A&P [mechanic] failed to follow inspection procedures as outlined in [the] work card and [the] Manufacturer Maintenance Manual.'

Full narrative

On September 23, 1996, at 2245 central daylight time, a Hughes 269C, N7492F, owned and operated by the City of Houston, sustained substantial damage during an autorotation near Houston, Texas. The flight instructor and commercial pilot receiving instruction received minor injuries. Visual meteorological conditions prevailed for the Title 14 CFR Part 91 night instructional flight, and a flight plan was not filed. The flight originated at the Houston Hobby Airport, Houston, Texas, about 2110.

The flight instructor reported that he was demonstrating an autorotation from 50 feet AGL. He initiated the autorotation to the grassy area between taxiway Foxtrot and taxiway Golf 2, just west of runway 17. The helicopter touched down with skids level and he increased the collective to keep the aircraft skids light on the ground and to maintain a straight ground track. The helicopter had traveled approximately 70 feet, and was moving at approximately 20 knots when the aircraft pitched forward and to the right. He "felt at least three severe impacts to the aircraft and then the aircraft was stopped."

Examination of the helicopter by the FAA inspector and operator revealed that the left and right skid tubes were fractured, and the right skid was detached from its front and rear gear dampers. The tailboom and tail rotor were "sheared off' by the "main rotor blades." According to the FAA inspector, a "certified A&P [mechanic] failed to follow inspection procedures as outlined in [the] work card and [the] Manufacturer Maintenance Manual."

According to the operator, the bottom of the right skid tube was "worn beyond the manufacturers tolerances."

Probable cause

company maintenance personnel not complying with maintenance procedures and directives to inspect the helicopter's skids, which allowed the right skid to wear beyond the manufacturer's tolerances. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Night/Dark
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
5
Wind direction
150
Wind speed (kt)
6
Temperature (F)
68
Nearest airport
WILLIAM P. HOBBY
Distance from field
0.0
Airport elevation
47

Aircraft

RegistrationMakeModelDamageFAR part
N7492F Hughes 269C SUBS 091

Sequence of events

#OccurrencePhase
1 195 Cruise
2 130 Cruise

Findings

Finding
10417 cause
10417
24102 cause
13012