N18WC Cunningham ROTORWAY EXEC accident

NTSB LAX97LA014 · 1996-10-13 · MATHER, CA · near MHR

Docket — crew, injuries and powerplant

Summary

The pilot of a home built helicopter was attempting to drop an object (bag of flour) to a target on the ground. Approaching the target area, the helicopter was observed to maneuver, then it went out of control and crashed. Investigation revealed evidence that the main rotor blades contacted and severed the tailboom. Also, there was evidence of mast bumping. The helicopter was equipped with composite main rotor blades; kit/factory approved blades were made of metal. No mechanical malfunction was found.

Full narrative

On October 12, 1996, at 1755 hours Pacific daylight time, an experimental Rotorway Exec helicopter, N18WC, crashed at Mather Airport, Mather, California. The pilot was conducting a local visual flight rules personal flight. The helicopter, registered to and operated by the pilot, was destroyed by impact forces and the resulting postimpact fire. The certificated private pilot, the sole occupant, sustained fatal injuries. Visual meteorological conditions prevailed with the winds estimated by witnesses to be at 10 to 15 miles per hour with gusts. The flight departed Mather Airport at an undetermined time.

Ground witnesses reported that they observed the helicopter execute a hard right turn followed by a hard left turn with some oscillations. During this maneuver, the main rotor blades struck the tailboom. The helicopter entered an uncontrolled descent, crashed and burned. Examination of the wreckage revealed that the main rotor blades were of a composite material and not the aluminum blades authorized by the manufacturer. There was evidence of some mast bumping next to the teeter stops behind the thrust stops. There was no evidence found of a mechanical malfunction.

According to a manufacturer representative at the accident site, he was informed by other pilots that the accident pilot was making a bomb run over a ground target using a bag of flour. He was told that a bag of flour was somewhere in the cabin area and the helicopter was at the correct location over the target area when the accident sequence began.

Probable cause

excessive maneuvering by the pilot, which allowed the main rotor blades to contact and sever the tail rotor system and allowed mast bumping to occur. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Fatal
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
20000
Visibility (sm)
20
Wind direction
180
Wind speed (kt)
10
Temperature (F)
77
Nearest airport
SACRMENTO MATHER
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N18WC Cunningham ROTORWAY EXEC DEST 091

Sequence of events

#OccurrencePhase
1 100 Cruise
2 130 Cruise
3 230 Cruise

Findings

Finding
24583
24543 cause
11201
13012
11201
24806