N728PC Karmy ROTORWAY EXEC accident

NTSB SEA97LA020 · 1996-10-25 · REDMOND, OR · near 62OR

Docket — crew, injuries and powerplant

Summary

During a crosswind takeoff the helicopter rolled over. The pilot reported that he failed to remove the dolly wheels from the helicopter, leaving an 18 inch handle dangling from the skid. During takeoff, the handle caught in the ground and the helicopter rolled over.

Full narrative

On October 25, 1996, about 1345 Pacific daylight time, a Karmy Rotorway Exec, N728PC, registered to the pilot, rolled over on takeoff and was substantially damaged. The pilot, the sole occupant, received minor injuries.

The pilot reported that he failed to remove the dolly wheels from the helicopter, leaving an 18 inch handle dangling from the skid. During takeoff with a cross wind, the handle caught in the ground and the helicopter rolled over.

Probable cause

The pilot's failure to remove the dolly wheels during the preflight inspection. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
280
Wind speed (kt)
4
Nearest airport
CINDER BUTTE HELIPORT
Distance from field
0.0
Airport elevation
2900

Aircraft

RegistrationMakeModelDamageFAR part
N728PC KARMY ROTORWAY EXEC SUBS 091

Sequence of events

#OccurrencePhase
1 380 Cruise

Findings

Finding
24002 cause