N6262N Bell 206B accident

NTSB LAX97LA057 · 1996-11-29 · MCGREGOR POINT, HI

Docket — crew, injuries and powerplant

Summary

The helicopter was operating in mountainous terrain assisting in the construction of power lines. The helicopter was positioning the passenger near the conductor lines in preparation for a line-pull. The passenger was sitting behind the pilot in the rear seat. The passenger would physically kick the travelers into the proper position at the top of the 80-foot metal pole in preparation for a line pull to establish proper tension. According to the witnesses, the helicopter was approaching pole number 89 from the upwind side to straighten the traveler. As they aligned the traveler and moved away, the rotor wash cocked the traveler off-line again. The helicopter reapproached the pole at a speed higher than before. The helicopter skid contacted the pole 2 feet below the top and the helicopter dynamically rolled over the top of the pole. The pole entered the pilot's doorway. The pilot released all controls and braced himself against the pole during the maneuver. The helicopter severed three main conductors before colliding with the ground.

Full narrative

On November 29, 1996, at 1330 hours Hawaiian standard time, a Bell 206B, N6262N, operated by Pacific Helicopter Tours, Inc., of Kahului, Hawaii, was substantially damaged near McGregor Point, Maui, Hawaii, during a power line construction project. The pilot and his passenger both received serious injuries. Visual meteorological conditions prevailed for the operation and no flight plan was filed. The flight originated at 0630 on the morning of the accident.

According to the operator, the helicopter was operating in mountainous terrain assisting in the construction of power lines. At the time of the accident, the helicopter was positioning the passenger near the conductor lines in preparation for a line pull. The passenger was sitting behind the pilot in the rear seat. The passenger would physically kick the travelers into the proper position at the top of the 80-foot metal pole in preparation for a line-pull to establish proper tension.

According to witnesses, the helicopter was approaching pole number 89 from the upwind side to straighten the traveler. As they aligned the traveler and moved away, the rotor wash cocked the traveler off-line again. The helicopter reapproached the pole at a speed higher than before. The helicopter skid contacted the pole about 2 feet below the top and the helicopter dynamically rolled over the top of the pole. The pole entered the pilot's doorway. The pilot released all controls and braced himself against the pole during the maneuver. The helicopter severed the three main conductors before colliding with the ground.

Probable cause

the pilot's failure to maintain control of the aircraft and distance from the pole. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Serious
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
UNK
Ceiling (ft)
0
Visibility (sm)
20
Wind direction
80
Wind speed (kt)
17
Temperature (F)
82
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N6262N Bell 206B SUBS 091

Sequence of events

#OccurrencePhase
1 220 Cruise
2 380 Cruise

Findings

Finding
20200
24523 cause
24566 cause