N8093F Cessna 150F accident

NTSB SEA97LA101 · 1997-05-07 · PLAINS, MT · near S34

Docket — crew, injuries and powerplant

Summary

The pilot stated that he encountered gusting crosswind conditions during a landing in a Cessna 150 with a tailwheel conversion. The pilot could not maintain directional control of the airplane. The airplane ground looped and the right wing contacted terrain. The right wing, right lift strut and fuselage were substantially damaged.

Full narrative

On May 7, 1997, at 1010 mountain daylight time, N8093F, a Cessna 150F with a tail wheel conversion, operated by the owner/pilot, ground looped during landing rollout in Plains, Montana, and was substantially damaged. The private pilot, the sole occupant, was not injured. Visual meteorological conditions prevailed and no flight plan had been filed. The personal flight was conducted under 14 CFR 91.

According to a Federal Aviation Administration (FAA) aviation safety inspector from Helena, Montana, the pilot encountered gusting wind conditions during a landing on runway 30 at the Plains Airport. The airplane ground looped and the right wing contacted terrain. The right wing, right lift strut and fuselage were substantially damaged. No preimpact mechanical malfunctions were reported.

Probable cause

The pilot's failure to adequately compensate for wind conditions during the landing roll. Factors contributing to the accident were gusts and crosswinds. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
6500
Visibility (sm)
10
Wind direction
213
Wind speed (kt)
4
Temperature (F)
45
Nearest airport
PLAINS
Distance from field
0.0
Airport elevation
2462

Aircraft

RegistrationMakeModelDamageFAR part
N8093F Cessna 150F SUBS 091

Sequence of events

#OccurrencePhase
1 260 Cruise
2 320 Cruise

Findings

Finding
20000 factor
20000 factor
24026 cause
24539
24537