N919SF Bell 47G-2 accident

NTSB LAX97LA248 · 1997-07-21 · BUTTONWILLOW, CA

Docket — crew, injuries and powerplant

Summary

The pilot reported that he was spraying a cotton field that had power lines crossing it on wooden poles. He stated that as he was 'going around a pole,' the main rotor blade(s) hit the pole. The helicopter then crashed, began burning, and was destroyed.

Full narrative

On July 21, 1997, at 1025 hours Pacific daylight time, a Bell 47G-2, N919SF, collided with a power pole during an aerial application flight near Buttonwillow, California. Visual meteorological conditions prevailed at the time of the accident and no flight plan was filed. The helicopter was destroyed in the collision sequence and postcrash fire. The commercial pilot, the sole occupant, was not injured. The helicopter was operating under Title 14 CFR Part 137, and the flight originated from the field to be sprayed at approximately 1000.

In his written report, the pilot stated that he was spraying a cotton field that had power lines on wooden poles going through it. He stated that he was going around a pole and the main rotor blade hit the pole. The helicopter then rolled over, caught on fire, and was destroyed.

Probable cause

failure of the pilot to maintain adequate clearance from a utility pole (obstruction) during aerial application. The obstruction was a related factor. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
4
Temperature (F)
91
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N919SF Bell 47G-2 DEST 137

Sequence of events

#OccurrencePhase
1 220 Cruise

Findings

Finding
20200 factor
24526 cause