N9155H Rotz RAF 2000 GTX SE accident

NTSB SEA97LA189 · 1997-08-15 · OLYMPIA, WA · near OLM

Docket — crew, injuries and powerplant

Summary

During takeoff with a gyroplane, the pilot initiated the takeoff with a rotor speed of 150 rpm in order to expedite his takeoff for a landing airplane. As the aircraft became airborne, it started a roll to the left and the rotor blades struck the ground.

Full narrative

On August 15, 1997, approximately 1130 Pacific daylight time, a Rotz RAF 2000 GTX SE homebuilt gyroplane, N9155H, was substantially damaged when it collided with the ground during takeoff from the Olympia airport at Olympia, WA. The sole occupant received minor injuries. Visual meteorological conditions prevailed and no flight plan had been filed for the 14 CFR 91 flight.

The pilot reported that he had been cleared to takeoff from runway 17 and was starting a prerotation when the controller advised there was a LearJet on final and he would need to expedite his takeoff or clear the runway. The pilot initiated the takeoff roll with a rotor speed of 150 RPM. At 180 to 200 RPM the pilot disengaged the rotor and went to full power. As the aircraft became airborne, it started a roll to the left at about 10 ft elevation and the rotor blades struck the ground.

Probable cause

The pilot's failure to attain adequate rotor rpm prior to takeoff. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
225
Wind speed (kt)
5
Temperature (F)
70
Nearest airport
OLYMPIA
Distance from field
0.0
Airport elevation
206

Aircraft

RegistrationMakeModelDamageFAR part
N9155H ROTZ RAF 2000 GTX SE SUBS 091

Sequence of events

#OccurrencePhase
1 230 Cruise

Findings

Finding
24558 cause