N83146 Bell 206B accident
NTSB ANC98TA011 · 1997-12-05 · ANCHORAGE, AK · near CSR
Docket — crew, injuries and powerplant
Summary
Two commercial pilots were practicing touchdown autorotation landings at a private snow covered airstrip. The purpose of the flight was for both pilots to maintain their proficiency. The first pilot had performed several straight-in touchdown autorotations. During the last autorotation, the first pilot entered the autorotation at 800 feet above the ground and about 80 knots. During the descent, the pilot maintained a 65 knot airspeed, and began a deceleration flare about 50 to 60 feet above the ground. As the ground speed dissipated, the pilot leveled the helicopter, applied main rotor collective pitch, and touched down with about a 30 foot ground run. As the helicopter slowed to a stop, the pilot indicated the helicopter shuddered several times. The main rotor blades struck the tail boom, severing the horizontal and vertical stabilizer, and the tail rotor assembly, from the tail boom.
Full narrative
On December 5, 1997, about 1120 Alaska standard time, a Bell 206B helicopter, N83146, sustained substantial damage during a practice autorotation landing at the Campbell Airstrip, Anchorage, Alaska. The helicopter was being operated as a visual flight rules (VFR) local area government proficiency flight under Title 14 CFR Part 91, when the accident occurred. The helicopter is registered to, and operated by, the State of Alaska. The first pilot, seated in the right seat, and the second pilot, seated in the left seat, both certificated commercial pilots, were not injured. Visual meteorological conditions prevailed. The flight originated at Merrill Field, Anchorage, Alaska, at 1030.
The first pilot, a Fish and Wildlife Protection Officer, and the second pilot, a pilot for the Alaska State Troopers, reported they were performing practice touchdown autorotation landings to maintain their proficiency. The first pilot had performed several, straight-in, touchdown autorotations to snow covered terrain. During the last autorotation, the first pilot entered the autorotation at 800 feet above the ground, and about 80 knots. He indicated during the descent he maintained a 65 knot airspeed, and began a deceleration flare about 50 to 60 feet above the ground. As the ground speed dissipated, the pilot leveled the helicopter, applied main rotor collective pitch, and touched down with about a 30 foot ground run. As the helicopter slowed to a stop, the pilot indicated the helicopter shuddered several times.
Examination of the helicopter after landing revealed the main rotor blades struck the tail boom. The tail assembly, consisting of the horizontal and vertical stabilizer, and the tail rotor assembly, was severed from the tail boom.
Probable cause
The pilot's failure to maintain adequate rotor RPM during an autorotation landing. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 5
- Wind direction
- 0
- Temperature (F)
- 19
- Nearest airport
- CAMPBELL AIRSTRIP
- Distance from field
- 0.0
- Airport elevation
- 286
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N83146 | Bell | 206B | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | 200 | Cruise |
Findings
| Finding | |
|---|---|
| 13012 | |
| 24520 | |
| 24558 | cause |