N8626H Grumman-Schweizer G-164A accident

NTSB ATL98LA055 · 1998-03-14 · MARIANNA, FL

Docket — crew, injuries and powerplant

Summary

Approximately ten minutes into the flight the pilot reported that the engine developed a rough running condition. The pilot tried several power settings in an effort to reduce the condition, but no action on his part resolved the rough running condition. Since the pilot could not maintain altitude, the he selected an adjacent field for an emergency landing. The pilot said that landing surface was rough and uneven. Examination of the engine assembly disclosed that the right magneto cover was not secure and that the five screws that secure the cover to the magneto assembly were missing. The visual examination of the internal components of the magneto assembly showed evidence of water stains on the magneto block. Internal component continuity was established when the engine was rotated completely through. Low compression was also noted on all cylinders.

Full narrative

On March 14, 1998, at 0910 central standard time, a Grumman-Schweizer G-164A, N8626H, nosed over, according to the pilot, during a full stop landing on a county road near Marianna Florida. The aerial application flight operated under the provisions of 14 CFR Part 137 with no flight plan filed. The pilot reported that visual weather conditions prevailed at the time of the accident. The commercial rated pilot received minor injuries. According to the pilot, the airplane sustained substantial structural damage. The flight departed the staging area near Marianna, Florida, at 0905.

Approximately five minutes into the flight the pilot reported that the engine developed a rough running condition. The pilot tried several power settings in an effort to reduce the condition, but no action on his part resolved the rough running condition. Since the pilot could not maintain altitude, he then selected an adjacent field for an emergency landing. The pilot said that landing surface was rough and uneven.

Examination of the engine assembly disclosed that the right magneto cover was not secure and that the five screws that secure the cover to the magneto assembly were missing. The visual examination of the internal components of the magneto assembly showed evidence of water stains on the magneto block. Internal component continuity was established when the engine was rotated completely through. Low compression was also noted on all cylinders. A small quantity of fuel was recovered from the carburetor. According to the aircraft wreckage recovery crew, a substantial amount of fuel was recovered from the wing tanks at the accident site.

Probable cause

The failure of maintenance personnel to secure the magneto cover that resulted in water contamination and the subsequent loss of engine power. A factor was rough and uneven terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
260
Wind speed (kt)
5
Temperature (F)
52
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N8626H Grumman-Schweizer G-164A SUBS 137

Sequence of events

#OccurrencePhase
1 350 Cruise
2 180 Cruise
3 300 Cruise

Findings

Finding
14801 cause
14801 cause
24100 cause
19200 factor