N6356D Cessna 172N accident

NTSB FTW98LA198 · 1998-04-25 · PARKER, CO

Docket — crew, injuries and powerplant

Summary

The instructor pilot (CFI) said that after completing a local instructional flight, he and his student entered an extended right base for runway 35R, about 5 miles southeast of the airport. He 'suddenly heard the engine lose a major portion of power.' While performing an emergency check of the instruments, the instructor noted that the engine power had dropped to 1,800 rpm. Realizing they would be unable to glide to the airport due to the loss of engine power, the CFI executed an emergency landing on a field near a golf course. The ground was muddy due to an accumulation of rain and snow from the previous night. After the airplane traveled a short distance, the nose wheel struck a rut, and the airplane nosed over. Examination of the aircraft engine revealed that the #1 (right front) cylinder intake pushrod was bent. After removing the valve cover, a stud that anchored the #1 exhaust valve rocker arm was found to be fractured, and the #1 exhaust valve was in the closed position. There was no damage to the valve lifters or camshaft.

Full narrative

On April 25, 1998, approximately 1330 mountain daylight time, a Cessna 172N, N6356D, operated by Aspen Air Corporation, was substantially damaged during a forced landing near Parker, Colorado. The flight instructor and his student were not injured. Visual meteorological conditions prevailed, and no flight plan was filed. The instructional flight was operated under Title 14 CFR Part 91 and originated at Englewood, Colorado, approximately one hour before the mishap.

According to the flight instructor, he and his student were returning to the airport after an instructional flight. The instructor reported that while on an extended right base for runway 35R approximately 5 miles southeast of the airport, he "suddenly heard the engine lose a major portion of power." While performing an emergency check of the instruments, the instructor noted that the engine power had dropped to 1,800 rpm.

Realizing they would be unable to glide to the airport due to the loss of engine power, the instructor executed an emergency landing in a field near a golf course. The ground was muddy due to an accumulation of rain and snow from the previous night. Upon touchdown, the airplane traveled a short distance before the nose wheel struck a rut left by a tractor, and the aircraft nosed over.

This investigator examined the engine at the facilities of Beegles Aircraft Service, Greeley, Colorado, on May 18, 1998, and again on June 17, 1998. The no. 1 (right front) cylinder intake pushrod was bent. After removing the valve cover, it was discovered that the stud that anchors the exhaust valve rocker arm had fractured. The exhaust valve was in the closed position. There was no damage to the valve lifters and camshaft.

Probable cause

a fractured #1 exhaust valve rocker arm stud, which subsequently resulted in loss of engine power and a forced landing. The lack of suitable terrain in the forced landing area was a related factor. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
16000
Visibility (sm)
50
Wind direction
360
Wind speed (kt)
10
Temperature (F)
59
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N6356D Cessna 172N SUBS 091

Sequence of events

#OccurrencePhase
1 352 Cruise
2 180 Cruise
3 300 Cruise

Findings

Finding
14017 cause
14009
14016
19200 factor
19200 factor