N154CH Piper PA-23-250 accident

NTSB MIA98LA145 · 1998-04-26 · FRUITLAND PARK, FL · near 5X1

Docket — crew, injuries and powerplant

Summary

After a report of a normal touchdown on the grass runway, the right main landing gear fork and rod assembly failed. The right wing dropped, contacted the runway, and the airplane veered to the right and collided with obstructions. Metallurgical examination of the failed fork and rod assembly, and AN bolt, revealed that the fork failed due to overstress and the bolt failed in shear. No preexisting cracks were noted in the failed fork or bolt.

Full narrative

On April 26, 1998, about 1340 eastern daylight time, a Piper PA-23-250, N154CH, registered to Caesair, Inc., experienced failure of the right main landing gear on landing at the Flying Palomino Ranch Airstrip, near Fruitland Park, Florida. Visual meteorological conditions prevailed at the time and no flight plan was filed for the 14 CFR Part 91 personal flight. The airplane was substantially damaged and the private-rated pilot and two passengers were not injured. The flight originated about 1315, from the Orlando International Airport, Orlando, Florida.

The pilot stated that after a normal touchdown, the right wing dropped and the airplane veered to the right. He applied full left rudder input, but the airplane veered to the right and collided with metal objects on the ground, adjacent to the runway, then collided with a fence and fence poles.

Examination of the right main landing gear revealed that the right main landing gear fork and rod assembly was failed. Additionally, an AN bolt, which when installed is aligned with the longitudinal axis of the airplane and is located near the fracture surface of the fork, was also failed. The failed fork and rod assembly and AN bolt, along with a plug, were sent to the NTSB Metallurgy Laboratory in Washington, DC, for examination.

Metallurgical examination of the failed fork and rod assembly revealed no evidence of preexisting cracks. The fracture features were typical of an overstress. Examination of the failed AN bolt revealed it was bent and the fracture surface was flat on a transverse plane 90 degrees to the longitudinal direction of the bolt. No evidence of preexisting cracks were noted.

The airplane, minus the retained failed right main landing gear fork and rod assembly, failed AN bolt, and plug, was released to the owner on May 8, 1998. The retained components were released to Mr. Steve Pulak, of Sample International, Inc., on June 24, 1998.

Probable cause

the pilot's failure to attain the proper rate of descent at touchdown. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
6
Temperature (F)
81
Nearest airport
FLYING PALOMINO RANCH
Distance from field
0.0
Airport elevation
70

Aircraft

RegistrationMakeModelDamageFAR part
N154CH Piper PA-23-250 SUBS 091

Sequence of events

#OccurrencePhase
1 200 Cruise
2 191 Cruise

Findings

Finding
24525 cause
10401