N4062H Butler Tool RAF 2000 accident

NTSB CHI98LA163 · 1998-05-16 · RENSSELAER, IN · near RZL

Docket — crew, injuries and powerplant

Summary

The pilot reported he made a 'normal' approach to runway 27. He reported that he had 'too much flare' during the landing and the gyroplane got into a nose high attitude. According to the pilot, the rotor blades then contacted the ground. The gyroplane then touched down hard and rolled over.

Full narrative

On May 16, 1998, at 1647 eastern daylight time, a Butler Tool RAF 2000, N4062H, operated by a private pilot rolled over following a loss of control while landing at the Jasper County Airport, Rensselaer, Indiana. The pilot was not injured. The gyroplane was substantially damaged. The 14 CFR Part 91 personal flight was operating in visual meteorological conditions without a flight plan. The flight originated from the Jasper County Airport, at 1630 edt.

The pilot reported he made a "normal" approach to runway 27. He reported that he had "too much flare" during the landing and the gyroplane got into a nose high attitude. According to the pilot, the rotor blades then contacted the ground. The gyroplane then touched down hard and rolled over.

Probable cause

the pilot excessively flared the gyroplane during the landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
290
Wind speed (kt)
12
Temperature (F)
81
Nearest airport
JASPER COUNTY
Distance from field
0.0
Airport elevation
698

Aircraft

RegistrationMakeModelDamageFAR part
N4062H Butler Tool RAF 2000 SUBS 091

Sequence of events

#OccurrencePhase
1 200 Cruise
2 160 Cruise
3 380 Cruise

Findings

Finding
24535 cause