N4028T Hiller UH-12E accident

NTSB FTW98LA253 · 1998-06-02 · DELAPLAINE, AR

Docket — crew, injuries and powerplant

Summary

The helicopter was traveling in an easterly direction at an airspeed of 60 knots, while maintaining a constant 5 foot clearance over the rice field, when the transmission failed. The pilot turned the helicopter to the right to avoid a tall tree, as he simultaneously initiated a forced landing. During the touchdown on soft ground, both skids and the collapsed and the tailboom was severed by the main rotor blades. According to the maintenance records, the main transmission (part number 23700-9, serial number 617), which has a recommended TBO of 1,200 hours, had accumulated 1,048 hours since its last overhaul in 1993. According to the manufacturer, the 23700-9 transmissions are subject to a recurring inspection of the oil filter every 50 flight hours in accordance with Airworthiness Directive 81-17-03. According to the maintenance logbooks, the last compliance with AD 81-17-03 was 340 hours prior to the accident, on March 26, 1996. Examination of the transmission by the manufacturer's representative revealed a massive failure of the first stage planetary gear system due to lack of lubrication.

Full narrative

On June 2, 1998, at 1815 central daylight time, a Hiller UH-12E helicopter, was substantially damaged during a forced landing following a main transmission failure while maneuvering near Delaplaine, Arkansas. The commercial pilot, sole occupant of the helicopter, was not injured. The helicopter was owned and operated by Wilson Flying Service, Inc., of Walnut Ridge, Arkansas. Visual meteorological conditions prevailed for the local Title 14 CFR Part 137 aerial application flight for which a flight plan was not filed. The flight originated from a nearby farm approximately 5 minutes prior to the accident.

The pilot reported that he was in the process of completing his sixth aerial application pass while dispensing herbicides on rice fields using east to west spray swaths. The helicopter was traveling in an easterly direction at an airspeed of 60 knots, while maintaining a constant 5 foot clearance over the rice field when the failure occurred.

The pilot further stated that the helicopter was operating normally until he heard a loud grinding and growling noises coming from the area of the main transmission. The grinding noise, which was accompanied by a severe vibration, was proceeded by "the needles splitting and a marked increased in engine RPM."

Suspecting an imminent transmission failure, the pilot turned the helicopter to the right to avoid a 50 foot tall cottonwood tree, as he simultaneously initiated a forced landing to an area short of a ditch and a tree line. During the touchdown in the soft ground, the left landing gear skid broke, the main rotor blades impacted the ground and the tailboom was severed by the rotating rotor blades. The helicopter came to rest in the upright position on a heading of 240 degrees, with both skids and crosstubes collapsed.

Maintenance records that were provided by the operator, were reviewed by a FAA inspector. Entries in the records indicate that the main transmission (part number 23700-9, serial number 617), which has a recommended TBO of 1,200 hours, had accumulated 1,048 hours since its last overhaul in 1993. According to the manufacturer, the 23700-9 transmissions are subject to a recurring inspection of the oil filter every 50 flight hours in accordance with Airworthiness Directive (AD) 81-17-03. According to the maintenance logbooks, the last inspection in accordance with AD 81-17-03 was completed 340 hours prior to the accident, on March 26, 1996, at 708 Hobbs hours (1,908 hours total airframe hours).

Examination of the transmission by a manufacturer's representative revealed "a massive failure of the first stage planetary gear system due to lack of lubrication." See enclosed manufacturer's report dated June 17, 1998, for details of the examination.

Probable cause

The failure of maintenance personnel to comply with and airworthiness directive, which resulted in failure of the planetary gear due to lack of lubrication. A contributing factors was the lack of suitable terrain for the pilot to execute a forced landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
210
Wind speed (kt)
13
Temperature (F)
97
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N4028T Hiller UH-12E SUBS 137

Sequence of events

#OccurrencePhase
1 130 Cruise
2 180 Cruise
3 320 Cruise

Findings

Finding
15215 cause
11006 cause
24103 factor
24520
19200 factor