N6352B Cessna 182A accident

NTSB DEN99LA017 · 1998-11-01 · BEDFORD, WY

Docket — crew, injuries and powerplant

Summary

The pilot was moving his airplane from a friend's private airstrip to his own recently constructed airstrip. The pilot said he inspected the runway shortly before the accident and determined the ground was 'good enough to land on.' A full flap (40 degrees) landing was made. The airplane rolled onto a soft area, slowed rapidly, and nosed over.

Full narrative

On October 31, 1998, approximately 1700 mountain standard time, a Cessna 182A, N6352B, was substantially damaged when it nosed over during landing near Bedford, Wyoming. The airline transport rated pilot, the sole occupant aboard, was not injured. Visual meteorological conditions prevailed and no flight plan had been filed for the personal flight being conducted under Title 14 CFR Part 91. The flight originated at 1655 from another private airstrip near Bedford, Wyoming.

According to the pilot's accident report, he was moving his airplane from a friend's private airstrip to his own recently constructed airstrip. The pilot said he inspected the runway shortly before the accident and determined the ground was "good enough to land on." A full flap (40 degrees) landing was made. The pilot said the airplane rolled onto a soft area, slowed rapidly, and nosed over.

Probable cause

The pilot's failure to identify a soft area on his newly constructed airstrip, which subsequently caused his airplane to nose over. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
50
Wind direction
0
Temperature (F)
43
Distance from field
0.0
Airport elevation
6400

Aircraft

RegistrationMakeModelDamageFAR part
N6352B Cessna 182A SUBS 091

Sequence of events

#OccurrencePhase
1 320 Cruise
2 300 Cruise

Findings

Finding
24029 cause
19001 cause