N866Z Bell 47G2 accident
NTSB ATL94LA009 · 1993-10-25 · BILLINGSLEY, AL
Docket — crew, injuries and powerplant
Summary
THE PILOT REPORTED THAT AS HE ATTEMPTED TO TAKEOFF FROM A TRANSPORT TRAILER, THE RIGHT SKID HOOKED A BRACKET. DYNAMIC ROLL- OVER WAS INDUCED AND THE HELICOPTER ROLLED UNTIL THE MAIN ROTOR BLADES IMPACTED THE GROUND.
Full narrative
On October 25, 1993, about 1130 central daylight time, a Bell 47G2 helicopter, N866Z, rolled over during takeoff from a transport trailer near Billingsley, Alabama. The helicopter was registered to and operated by Precision Air Services, Inc. It was operated under 14 CFR Part 137 and visual flight rules. A flight plan was not filed for the agricultural operation. The commercial pilot was not injured while the helicopter was substantially damaged. The flight was originating at the time of the accident.
According to the pilot the right skid hooked a bracket on the trailer as lift off occurred. The helicopter rolled over onto its right side, which allowed the main rotor to contact the ground. The pilot stated that there were no mechanical malfunctions.
Probable cause
THE PILOT'S IMPROPER VERTICAL LIFTOFF WHICH RESULTED IN DYNAMIC ROLL-OVER AND THE MAIN ROTOR'S IMPACT WITH THE GROUND. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- OVC
- Ceiling (ft)
- 25000
- Visibility (sm)
- 7
- Wind direction
- 70
- Wind speed (kt)
- 9
- Temperature (F)
- 66
- Distance from field
- 0.0
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N866Z | BELL | 47G2 | SUBS | 137 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | 380 | Cruise |
Findings
| Finding | |
|---|---|
| 24561 | cause |