N61946 Cessna 180K accident

NTSB SEA94LA016 · 1993-10-07 · GARFIELD, WA

Docket — crew, injuries and powerplant

Summary

WHILE THE AIRPLANE WAS IN CRUISE FLIGHT AT 500 FEET AGL, THE ENGINE BEGAN TO VIBRATE AND SHAKE. THE PILOT SHUT THE ENGINE DOWN AND INITIATED A FORCED LANDING TO AN OPEN AREA. DURING THE GROUND ROLL, THE AIRPLANE COLLIDED WITH THE ROUGH TERRAIN AND GROUND LOOPED. POST-CRASH INVESTIGATION REVEALED THAT THE NUMBER THREE CONNECTING ROD WAS BROKEN. METALLURGICAL EXAMINATION REVEALED THAT THE BREAKING AND DAMAGE OF THE NUMBER THREE CONNECTING ROD WAS THE RESULT OF FATIGUE FRACTURE OF ONE OF THE CONNECTING ROD BOLTS.

Full narrative

On October 7, 1993, at 1200 Pacific daylight time, a Cessna 180K, N61946, lost engine power during cruise flight. The pilot initiated a forced landing to an open area near Garfield, Washington. During the ground roll, the airplane collided with the rough terrain and ground looped. Visual meteorological conditions prevailed at the time and no flight plan was filed. The airplane was substantially damaged and the private pilot and his passenger were not injured. The flight had originated from Spokane, Washington, on October 7, 1993, at 1100 and was en route to Grangeville, Idaho, during a personal flight.

The pilot reported during a telephone interview and subsequent written statement, that while in cruise flight at 500 feet above ground level, the engine began to vibrate and shake. The pilot stated that he immediately shut the engine down and initiated a forced landing. During the ground roll on the rough terrain, the airplane ground looped before coming to a stop.

During the post-crash investigation, it was found that the number three connecting rod was broken. The connecting rod and related assembly were metallurgically examined by the National Transportation Safety Board Materials Laboratory. The metallurgist reported that "The breaking and damage of the No. 3 connecting rod was the result of fatigue fracture of one of the connecting rod bolts." No metallurgical defects could be found to contribute to the initiation of the fracture. Extensive post- separation damage was noted to nearly all of the connecting rod and assembly.

Probable cause

CONNECTING ROD BOLT FATIGUE. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
800
Visibility (sm)
30
Wind direction
0
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N61946 CESSNA 180K SUBS 091

Sequence of events

#OccurrencePhase
1 350 Cruise
2 180 Cruise
3 320 Cruise

Findings

Finding
14015 cause
14006
19200