N53198 Cessna A188B accident

NTSB ATL99LA101 · 1999-06-19 · GLEN ALLAN, MS

Docket — crew, injuries and powerplant

Summary

The pilot reported that, while surveying a field for future work, the airplane became uncontrollable. He selected an emergency landing area, and made a forced landing in a field. The airplane sustained structural damage during the forced landing when the left wing collided with the ground, and the airplane cartwheeled. During the examination of the airplane, the pilot reported that the left aileron control bolt had separated from the control surface. When the left aileron was removed from the airframe, the missing bolt was recovered from the inter-structure of the wing area. The bolt was reinstalled through the aileron assembly, and appeared to provide enough thread material to secure the aileron assembly. The examination of the bolt assembly also disclosed that the bolt that connected the forward end of the control rod to the bell crank was too short and did not protrude through the nylon lock on the nut. The rod-end bearing was also seized and would not move.

Full narrative

On June 19, 1999, at 1400 central daylight time, a Cessna A188B, N53198, collided with the ground during a forced landing near Glen Allan, Mississippi, following an in-flight malfunction of the aileron control system. The business flight was operated by the pilot under the provisions of Title 14 CFR Part 91 with no flight plan filed. Visual meteorological conditions prevailed at the time of the accident. The airplane sustained substantial damage and the commercial pilot was not injured. The flight initially departed Glen Allan, Mississippi, at 1355.

The pilot reported that, while surveying a field for future work, the airplane became uncontrollable when the ailerons malfunctioned. The pilot selected an emergency landing area, and made a forced landing in a field. The airplane sustained structural damage during the forced landing when the left wing collided with the ground, and the airplane cartwheeled.

During the examination of the airplane, the pilot reported that the left aileron control bolt had separated from the control surface. When the left aileron was removed from the airframe the missing bolt was recovered from the inter-structure of the wing area. The bolt was reinstalled through the aileron assembly, and appeared to provide enough thread material to secure the aileron assembly. The examination of the bolt assembly also disclosed that the bolt that connects the forward end of the control rod to the bell crank was too short and did not protrude through the nylon lock on the nut. The rod-end bearing was also seized and would not move.

Probable cause

The improper installation of a nut and bolt assembly by a maintenance personnel that resulted in the in-flight loss of control of the left ailiron. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
6500
Visibility (sm)
7
Wind direction
130
Wind speed (kt)
5
Temperature (F)
86
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N53198 Cessna A188B SUBS 091

Sequence of events

#OccurrencePhase
1 250 Cruise
2 180 Cruise
3 230 Cruise

Findings

Finding
10308 cause
11303 cause
24111 cause
19200