N32186 Waco UPF7 accident

NTSB LAX00LA011 · 1999-10-17 · JEAN, NV · near 0L7

Docket — crew, injuries and powerplant

Summary — aircraft 1

The Waco UPF7 taxied into a stationary Cessna 195 on a taxiway leading to the active runway. The airport manager reported that the Cessna 195 was in line behind other aircraft on a taxiway awaiting departure on runway 2L. The Waco UPF7 was proceeding along the taxiway to runway 2L for takeoff. The airport manager said the taxiway is too narrow for the conventional geared Waco to effectively S-turn. The pilot of the Waco said that as he was taxiing he spotted some rocks on runway 2L and was engaged in a radio conversation with the ground controller reporting debris on the runway. He noted that this distracted his attention and he did not see the stopped Cessna 195 ahead on the taxiway and taxied into the left wing of that aircraft.

Full narrative — aircraft 1

On October 17, 1999, at 1510 hours Pacific daylight time, a Waco UPF7, N32186, collided with a Cessna 195, N4301V, while taxing for takeoff at the Jean, Nevada, airport. The Cessna 195 was on a taxiway holding short of runway 2L waiting for departure and the Waco UPF7 was taxing to runway 2L for departure at the time of the collision. The airplanes were operated by their respective owners under 14 CFR Part 91 for local area personal flights. The Waco UPF7 sustained minor damage to its propeller. The Cessna 195 sustained substantial damage to the left wing. The commercial pilot in the Waco UPF7, and, the airline transport pilot and the three passengers in the Cessna 195, were not injured. Visual meteorological conditions prevailed and no flight plans were filed for either operation.

According to the manager of the Jean airport, the Cessna 195 was in line behind other aircraft on a taxiway awaiting departure on runway 2L. The Waco UPF7 was proceeding along the taxiway to runway 2L for takeoff. The airport manager said the taxiway is too narrow for the conventional geared Waco to effectively S-turn. The pilot of the Waco stated to the airport manager that he did not see the stopped Cessna 195 and taxied into the left wing of that aircraft.

In a telephone interview, the pilot of the Waco said that as he was taxiing he spotted some rocks on runway 2L and was engaged in a radio conversation with the ground controller reporting debris on the runway. He noted that this distracted his attention and he did not see the stopped Cessna 195 ahead on the taxiway.

Summary — aircraft 2

The pilot of the other aircraft, a Waco UPF7, taxied into the stationary Cessna 195 on a taxiway leading to the active runway. The airport manager reported that the Cessna 195 was in line behind other aircraft on a taxiway awaiting departure on runway 2L. The Waco UPF7 was proceeding along the taxiway to runway 2L for takeoff. The airport manager said the taxiway is too narrow for the conventional geared Waco to effectively S-turn. The pilot of the Waco said that as he was taxiing he spotted some rocks on runway 2L and was engaged in a radio conversation with the ground controller reporting debris on the runway. He noted that this distracted his attention and he did not see the stopped Cessna 195 ahead on the taxiway and taxied into the left wing of that aircraft.

Full narrative — aircraft 2

On October 17, 1999, at 1510 hours Pacific daylight time, a Waco UPF7, N32186, collided with a Cessna 195, N4301V, while taxing for takeoff at the Jean, Nevada, airport. The Cessna 195 was on a taxiway holding short of runway 2L waiting for departure and the Waco UPF7 was taxing to runway 2L for departure at the time of the collision. The airplanes were operated by their respective owners under 14 CFR Part 91 for local area personal flights. The Waco UPF7 sustained minor damage to its propeller. The Cessna 195 sustained substantial damage to the left wing. The commercial pilot in the Waco UPF7, and, the airline transport pilot and the three passengers in the Cessna 195, were not injured. Visual meteorological conditions prevailed and no flight plans were filed for either operation.

According to the manager of the Jean airport, the Cessna 195 was in line behind other aircraft on a taxiway awaiting departure on runway 2L. The Waco UPF7 was proceeding along the taxiway to runway 2L for takeoff. The airport manager said the taxiway is too narrow for the conventional geared Waco to effectively S-turn. The pilot of the Waco stated to the airport manager that he did not see the stopped Cessna 195 and taxied into the left wing of that aircraft.

In a telephone interview, the pilot of the Waco said that as he was taxiing he spotted some rocks on runway 2L and was engaged in a radio conversation with the ground controller reporting debris on the runway. He noted that this distracted his attention and he did not see the stopped Cessna 195 ahead on the taxiway.

Probable cause

The pilot's failure to maintain an adequate visual lookout while taxiing for departure. Factors in the accident were: the narrow nature of the taxiway and the pilot's subsequent inability to S-turn for better forward visibility, and, the pilot allowing himself to become distracted with minor cockpit duties while moving on the ground. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
4
Temperature (F)
70
Nearest airport
JEAN
Distance from field
0.0
Airport elevation
2832

Aircraft

RegistrationMakeModelDamageFAR part
N32186 Waco UPF7 MINR 091
N4301V Cessna 195 SUBS 091

Sequence of events

#OccurrencePhase
1 271 Cruise
1 271 Cruise

Findings

Finding
19013
20200
24016 factor
24021 cause
31110 factor
19013
20200
24016 factor
24021 cause
31110 factor