N13330 Cessna 172M accident

NTSB ATL00LA052 · 2000-04-30 · CLINTON, TN

Docket — crew, injuries and powerplant

Summary

The pilot reported that he was returning to the 1300-foot sod airstrip after refueling at a nearby airport. According to the pilot, he maintained a final approach airspeed of 80 to 85 knots. After completing the before landing checklist, which included lowering wing flaps and applying carburetor heat, the pilot realized that the landing approach had a tailwind component. The pilot reported that as he continued the approach, the airspeed was too high and he did not feel that the airplane had sufficient engine power to clear the lake and higher terrain beyond the end of the runway. He elected to land long on the runway and ground looped the airplane to avoid an embankment and a lake on the departure end of the runway. An eyewitness stated that the airplane was fast and long over the runway for the landing. Examination of the accident site showed that the airplane had rotated 180 degrees on the ground and was facing the opposite landing direction. The pilot reported no mechanical problems with the airplane.

Full narrative

On April 30, 2000, at 1530 eastern daylight time, a Cessna 172M, N13330, collided with the ground during an attempted landing on a private airstrip in Clinton, Tennessee. The personal flight was operated by the pilot under the provisions of Title 14 CFR Part 91 with no flight plan filed. Visual weather conditions prevailed at the time of the accident. The airplane sustained substantial damage, and the private pilot and his passenger were not injured. The local flight departed Clinton, Tennessee, at 1430.

The pilot reported that he was returning to the 1300 foot sod airstrip in Clinton after refueling at a nearby airport. According to the pilot, he maintained a final approach airspeed of 80 to 85 knots. After completing a before landing checklist, which included lowering wing flaps and applying carburetor heat, the pilot realized that the landing approach had a tailwind component. As the pilot continued the approach, the pilot said that the airspeed was too high for the approach and he did not feel that the airplane had sufficient engine power to clear the lake and higher terrain beyond the end of the runway. He elected to land long on the runway and ground looped the airplane to avoid an embankment and a lake on the departure end of the runway. An eyewitness stated that the airplane was fast and long over the runway for the landing.

Examination of the accident site showed that the airplane had rotated 180 degrees on the ground and was facing the opposite landing direction. No mechanical problems with the airplane were reported by the pilot.

Probable cause

The pilot's inadequate in-flight planning necessitating an intentional ground loop maneuver on landing. Contributing factors were the pilot's misjudgment of distance/airspeed, the high terrain surrounding the runway, and the tailwind condition. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
300
Wind speed (kt)
4
Temperature (F)
75
Nearest airport
MULLINS FIELD
Distance from field
0.0
Airport elevation
1088

Aircraft

RegistrationMakeModelDamageFAR part
N13330 Cessna 172M SUBS 091

Sequence of events

#OccurrencePhase
1 320 Cruise

Findings

Finding
19200 factor
20000 factor
24010 cause
24581 factor
24537