N8319A Cessna 170B accident

NTSB DEN00LA087 · 2000-05-13 · BEDFORD, WY · near WY60

Docket — crew, injuries and powerplant

Summary

The pilot said that while on takeoff roll from the grass runway, at approximately 40 miles per hour, 'I hit a soft spot which pulled the airplane hard left.' He said the airplane ground looped to the left. The pilot said the left landing gear collapsed, the left wing was bent, and the fuselage was damaged.

Full narrative

On May 13, 2000, approximately 0730 mountain daylight time, a Cessna 170B, N8319A, was substantially damaged when the aircraft ground looped on takeoff roll on Heiner Airstrip, Bedford, Wyoming. The commercial pilot and his two passengers were not injured. The pilot was operating the airplane under Title 14 CFR Part 91. Visual meteorological conditions prevailed for the local flight, which was originating at the time of the accident. No flight plan had been filed.

The pilot said that while on takeoff roll from the grass runway, at approximately 40 miles per hour, "I hit a soft spot which pulled the airplane hard left." He said the airplane ground looped to the left. The pilot said the left landing gear collapsed, the left wing was bent, and the fuselage was damaged.

Probable cause

The pilot's inadvertent ground loop. A factor was the soft grass airstrip. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
10000
Visibility (sm)
10
Wind direction
0
Temperature (F)
41
Nearest airport
HEINER
Distance from field
0.0
Airport elevation
6450

Aircraft

RegistrationMakeModelDamageFAR part
N8319A Cessna 170B SUBS 091

Sequence of events

#OccurrencePhase
1 260 Cruise

Findings

Finding
19001 factor
24537 cause