N6462C Piper PA-28-161 accident

NTSB LAX00LA330 · 2000-09-04 · PALO ALTO, CA · near PAO

Docket — crew, injuries and powerplant

Summary

The pilot reported he landed the rental aircraft 'somewhat hard' and collapsed the left main landing gear of the fixed gear airplane. The landing gear casting is bolted to the aft side of the wing spar with 8 bolts, 4 in a rectangular pattern on the top and 4 in a similar pattern on the bottom. During postaccident examination of the bottom 4 bolts it was determined that 2 were absent and not located in the wing, the bolt head was missing on the third bolt, and the fourth bolt was loose. All 4 of the upper attach bolts were loose. There was fretting at the casting-to-spar interface and the holes were elongated. The 8 bolts on the right main landing gear attachment, which did not fail, were all loose. There are no Airworthiness Directives or Service Bulletins in effect regarding the landing gear to wing spar attachment on this model aircraft. The aircraft manufacturer's Inspection Checklist for the 100-hour inspection instructs maintenance personnel to: 'Inspect gear struts, attachments, torque links and bolts for condition and security.'

Full narrative

On September 3, 2000, at 1840 hours Pacific daylight time, a Piper PA-28-161, N6462C, was substantially damaged when the left main landing gear collapsed during landing at Palo Alto Airport of Santa Clara County, Palo Alto, California. The private pilot and one passenger were not injured. The personal flight, operated under 14 CFR Part 91 by ZP Aviation, Inc., departed from Monterey, California about 0500. Visual meteorological conditions prevailed and no flight plan was filed.

The pilot reported that he landed the rental aircraft "somewhat hard" and collapsed the left main landing gear of the fixed gear airplane. According to the pilot, subsequent inspection of the aircraft revealed pre-existing damage to the bolts that attach the main landing gear to the spar. He reported that the landing gear casting is bolted to the aft side of the spar with 8 bolts; 4 in a rectangular pattern on the top, and 4 in a similar pattern on the bottom. Of the bottom 4 bolts, 2 were absent, the bolt head was missing on the third, and the fourth was loose. All 4 of the upper attach bolts were loose.

A mechanic, who inspected the aircraft after the accident, confirmed that the two missing bolts were not found in the wing. He added that there was fretting at the casting-to-spar interface, and that the attachment holes were elongated. He also added that the 8 bolts on the right main landing gear attachment, which did not fail, were all loose.

According to an investigator at The New Piper Aircraft Company, there are no Airworthiness Directives or Service Bulletins in effect regarding the landing gear to wing spar attachment on this model aircraft. The Piper Airplane Maintenance Manual for the PA-28-161 airplane, dated February 28, 1995, contains an Inspection Checklist for the 100-hour inspection. In the landing gear group of the checklist, item 16 states to "Inspect gear struts, attachments, torque links and bolts for condition and security."

Probable cause

The failure of maintenance personnel to detect and correct loose attachment fasteners and fretting at the landing gear attachment during maintenance inspections. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
310
Wind speed (kt)
3
Nearest airport
PALO ALTO APT OF SCC
Distance from field
0.0
Airport elevation
3

Aircraft

RegistrationMakeModelDamageFAR part
N6462C Piper PA-28-161 SUBS 091

Sequence of events

#OccurrencePhase
1 191 Cruise

Findings

Finding
10404
10404
10404
24102 cause
24105 cause