N521S Mihlebach WACO accident

NTSB NYC00LA259 · 2000-09-02 · WILLIAMSTOWN, NJ · near C01

Docket — crew, injuries and powerplant

Summary

At the end of a local VFR flight, the pilot flared the homebuilt airplane to land, and it touched down hard. The left axle bracket separated, and the airplane came to rest inverted. The pilot was the builder of the airplane.

Full narrative

On September 2, 2000, about 1145 Eastern Daylight Time, a homebuilt Waco, N521S, was substantially damaged during landing at Southern Cross Airport, Williamstown, New Jersey. The certificated private pilot and passenger were not injured. Visual meteorological conditions prevailed, and no flight plan was filed for the personal local flight conducted 14 CFR Part 91.

According to the pilot, he entered a "standard pattern" for Runway 27, and that the downwind, base, and final portions of the traffic pattern were "normal." When the pilot flared the airplane, it bounced, and then nosed over.

According to a Federal Aviation Administration inspector, the pilot flared to land on the runway, and the airplane touched down hard. The left axle bracket weld separated, and the airplane came to rest inverted. The pilot was the manufacturer of the airplane, and had welded the separated component.

Probable cause

The pilot's failure to execute an adequate flare, which resulted in a hard landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
5
Temperature (F)
82
Nearest airport
SOUTHER CROSS
Distance from field
0.0
Airport elevation
145

Aircraft

RegistrationMakeModelDamageFAR part
N521S Mihlebach WACO SUBS 091

Sequence of events

#OccurrencePhase
1 200 Cruise
2 191 Cruise
3 300 Cruise

Findings

Finding
24535 cause
10412