N84034 Cessna 172K accident

NTSB SEA00LA194 · 2000-09-28 · BURNS, OR

Docket — crew, injuries and powerplant

Summary

During a climb in turbulent conditions, the most-outboard five inches of one propeller blade separated from the aircraft. Due to the violent vibration that followed, the pilot shut the engine off and made an emergency landing in an open field. An examination at the NTSB materials laboratory determined that the blade section had separated due to a fatigue crack that had propagated through two-thirds of the chord of the blade. The origin of the fatigue crack was determined to be an area on the leading edge where the blade had been damaged by impact with a foreign object.

Full narrative

On September 28, 2000, approximately 1545 Pacific daylight time, a Cessna 172K, N84034, experienced a partial propeller blade separation while in a climb near Burns, Oregon. The private pilot, who was the sole occupant, was not injured, and the aircraft, which was owned and operated by the pilot, received no other damage during the forced landing that followed the separation. The 14 CFR Part 91 personal pleasure flight, which departed Burns Airport about 15 minutes prior to the blade separation, was en route to Aurora State Airport, Aurora, Oregon. The flight was being conducted in visual meteorological conditions. No flight plan had been filed. There was no report of an ELT activation.

According to the pilot, while nearing the top of a climb to 12,500 feet, and flying in an area of clear air turbulence, the aircraft's engine began to vibrate violently. He immediately shut the engine off by pulling the mixture to full-lean, and descended to an open field about 10 miles northwest of Burns. After a successful forced landing, the pilot discovered that a five-inch section was missing from the tip of one propeller blade.

The remaining portion of the blade (inboard) was shipped to the NTSB Materials Laboratory Division. There it was determined that the separation occurred at a location where a fatigue crack had developed across approximately two-thirds of the cross section of the blade. The fatigue crack initiated at a damaged area where the leading edge of the blade had impacted a foreign object. The depth of the damaged area was about 0.05 of an inch.

Probable cause

The separation of a portion of one propeller blade as a result of a fatigue crack that initiated at the site of foreign object damage to the blade. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
75
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N84034 Cessna 172K SUBS 091

Sequence of events

#OccurrencePhase
1 130 Cruise
2 180 Cruise

Findings

Finding
14501 cause
14501 cause
14501 cause