N2502G Cessna 182B accident

NTSB ATL01LA039 · 2001-03-15 · BOYNTON BEACH, FL

Docket — crew, injuries and powerplant

Summary

Shortly after takeoff, the pilot heard a 'loud bang' and the engine began to vibrate violently. The pilot attempted an emergency landing on a nearby field. The airplane collided with the ground and the nose wheel collapsed. During the examination, the actuator pin on one of the propeller blades was found to have failed.

Full narrative

On March 15, 2001, at 1200 eastern standard time, a Cessna 182B, N2502G, collided with the ground and nosed over during an off-airport emergency landing to a field near Boynton Beach, Florida. The personal flight was operated by the pilot under the provisions of Title 14 CFR Part 91 with no flight plan filed. Visual weather conditions prevailed at the time of the accident. The airplane received substantial damage. The commercial pilot and his passenger sustained minor injuries. The flight departed Palm Beach County Park in Lantana, Florida, at 1150.

A few minutes into the cruise portion of the flight, the pilot heard a 'loud bang' and the engine began to vibrate violently. The pilot immediately reduced engine power and checked the flight controls and determined that they were operational. The engine continued to vibrate it reduced engine power and would not respond when the throttle was advanced. The pilot selected the only available open area and attempted an emergency landing. During the landing roll, the airplane collided with a two foot berm and the nose wheel assembly collapsed. After the nose wheel assembly collapsed, the airplane skidded about 200 feet and nosed over.

Examination of the airplane revealed an actuator pin on one of the propeller blades had failed, and the pilot was unable to control the propeller blade pitch from the propeller control lever in the cockpit. A review of maintenance records revealed the failure occurred 205 hours before time between overhaul. The maintenance records also disclosed that the McCauley propeller assembly, model number 2A36C29, S/N581501, was returned to service after a complete overhaul on May 1, 1990. Subsequent to the overhaul, the maintenance logs showed several leading edge repairs to the propeller blades. No repair station records of the maintenance were recovered.

A review of recent service difficulty data failed to disclose a history of actuator pin failure with this propeller model.

Probable cause

The failure of a propeller actuator pin that resulted in an engine vibration and the loss of thrust. The airplane nosed over during the emergency landing roll. A factor was rough/uneven terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
4000
Visibility (sm)
10
Wind direction
160
Wind speed (kt)
12
Temperature (F)
82
Distance from field
3.0
Airport elevation
14

Aircraft

RegistrationMakeModelDamageFAR part
N2502G Cessna 182B SUBS 091

Sequence of events

#OccurrencePhase
1 130 Cruise
2 180 Cruise
3 230 Cruise

Findings

Finding
14518 cause
19200 factor