N6902K Schweizer G-164B accident

NTSB LAX01LA195 · 2001-05-31 · Butte City, CA

Docket — crew, injuries and powerplant

Summary

The airplane collided with high vegetation when the pilot made an off airport forced landing following a loss of engine power. The local aerial application flight departed a private strip. The pilot reported that a heavy vibration developed in the engine, and he shut it down. He tried to return to a nearby dirt strip, but had to land in a hay field. On the landing roll, the airplane encountered tall vegetation, which damaged the wings and landing gear attachment points. A Federal Aviation Administration inspector examined the airplane, and found a fractured bolt on the propeller. Metallurgical examination of the bolt indicated that the part failed in fatigue at a region of increased stress (stress concentration), though the part overall was not highly stressed (small overstress region).

Full narrative

On May 31, 2001, about 0700 Pacific daylight time, a Schweizer G-164B, N6902K, collided with terrain following a loss of engine power near Butte City, California. Chuck Jones Flying Service was operating the airplane under the provisions of 14 CFR Part 137. The commercial pilot sustained serious injuries; the airplane sustained substantial damage. The local aerial application flight departed a private strip about 0615. Visual meteorological conditions prevailed, and no flight plan had been filed.

The pilot reported that a heavy vibration developed in the engine and he shut it down. He tried to return to a nearby dirt strip, but had to land in a hay field. On the landing roll, the airplane encountered tall vegetation, which damaged the wings and landing gear attachment points.

A Federal Aviation Administration (FAA) inspector examined the airplane. He found a fractured bolt on the propeller.

A specialist from the National Transportation Safety Board Materials Laboratory examined the fractured bolt. He determined that it fractured at the base of the transition radius between the shank and the minor diameter of the threads. The fracture was on a flat plane normal to the surface, though the fracture was at a slight angle from the circumferential direction. The fracture surface contained arrest marks, which propagated through approximately 90 percent of the cross-sectional area. The origin area was at the surface where the specialist observed two ratchet marks. However, he observed no obvious material defects at the origin, and no defects such as nicks or scratches at the surface. The bolt contained the markings "FAA-PMA-MWA 50001."

Probable cause

a fatigue failure of a propeller bolt. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Serious
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
60
Wind direction
0
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N6902K Schweizer G-164B SUBS 137

Sequence of events

#OccurrencePhase
1 352 Cruise
2 180 Cruise
3 320 Cruise

Findings

Finding
11303 cause
11303 cause
11303 cause
19200