N2716X Cessna 180H accident

NTSB ANC01LA107 · 2001-08-10 · Big Lake, AK

Docket — crew, injuries and powerplant

Summary

The pilot reported he was attempting to takeoff from near the mouth of a river in a float-equipped airplane. During the takeoff roll, the right float collided with a sand bar, and the main landing gear collapsed, resulting in substantial damage to the airframe.

Full narrative

On August 9, 2001, about 2000 Alaska daylight time, a float-equipped Cessna 180H airplane, N2716X, received substantial damage when it collided with a sandbar during takeoff from the Alexander River, located about 20 miles southwest of Big Lake, Alaska. The airline transport certificated pilot and the sole passenger were not injured. The 14 CFR Part 91 local personal flight departed Lake Hood, Anchorage, Alaska, about 1700. The flight operated in visual meteorological conditions without a flight plan.

During a telephone interview with the NTSB investigator-in-charge on August 13, the pilot related he initiated a takeoff from the Alexander River near its confluence with the Susitna River. The pilot said the right float struck a sandbar he didn't see, and the right float collapsed. The right wing subsequently hit the sandbar, and received substantial damage.

Probable cause

The pilot's selection of an unsuitable area for takeoff. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
20
Wind direction
0
Temperature (F)
57
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N2716X Cessna 180H SUBS 091

Sequence of events

#OccurrencePhase
1 320 Cruise
2 191 Cruise

Findings

Finding
19200
24029 cause